The DSF120+C is a professional instrument with a consumer price tag. Now, customers can have a professional digital satellite finder with professional performance & results, without spending an arm and a leg to purchase a bulky and expensive meter.
A major improvement in the DSF120+C over the original DSF120+ model is the inclusion of an all-new Built-in Compass in the +C model.
The DSF120+C has a blue back light to allow use at night. The signal meter never needs to be recalibrated nor does it need complicated programming. It automatically recognizes the LNBF frequency and works with any C band, Ku band, or Ka band satellite. No need to input transponder frequency, symbol rate, or polarity. This meter is truly plug & play.
Are you a professional installer who does not want to spend a few hundred dollars on a satellite meter? This truly is the meter for you. Don't spend hours messing with the old technology analog signal meters and upgrade yourself to a new DSF120+C.
The DSF120+C Satellite Signal Meter / Finder is a satellite finder that helps make a precise dish set-up easy. Its ultimate sensitivity will indicate 0.2 dB level difference in 950 to 2400MHz.
Satellite Dish Mast Mount for Satellite Dish and Antennas
Lot of five,18 Universal mast The standard 1.66 OD satellite mast mount will work with Directv, Dish Network, and FTA satellite dishes with the same unting to vertical, horizontal, and pitches surface (wall, roof, diameter mount tube. Mount have a 90 degree range of motion for moetc.). Use for roof or sidewall mount for regular or large dishes.
38" J-Pole Antenna Mount Versatile all-in-one mount that can be used with antennas or satellite dishes. Can be mounted on the roof, wall, chimney or any other flat surface. J-pipe is reversible from mounting foot for a variety of positioning options. Gray weatherproof coating. Also available in shorter length
Rechargeable Birdog Satellite Meter Battery for Version(s) 2.5 / 3 / 4 SBP234
Manufacturer: Satellite Oasis
The Satellite Oasis NiMH Birdog battery pack is the perfect replacement for your aging Birdog Battery. Designed to Birdog specifications. Compatible with Birdog(s) 2.5, 3, and 4. Comes ready to install right out of the box. All that's needed is to charge your Birdog once installed and it's ready to work!
non penetrating foof mount satellite mount
This is the Non-Penetrating Roof Mount 2" for the Slimline Dish
2" Mast Diameter
Minor adjustment of mast pitch from 2 degrees positive to 10 degrees negative
Black powder coated steel construction
1.50" angle steel frame
Holds Eight concrete blocks for ballast
No roof drilling or roof penetration required
K.D. assembly allows easier portability to the roof.
This mount provides a 2.0" mast, the installer selects the diameter when assembling the frame. If the flat roof has a sleight pitch the mast can be adjusted from 2Â° outward from the frame to a little over 10Â° inward toward the block area.
No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of the assembly can be varied by the use of either "light" concrete blocks or standard weight blocks.
Of course, this and ALL roof mounted antenna assemblies should be tethered to the building with a flexible steel cable for maximum security.
SATELLITE INSTALLATION, SIMPLIFIED. Eliminate the guesswork when setting up your satellite system with the RadioShack 3GHz Satellite Finder. It allows you to easily tune your system while you're outside, eliminating the need to run inside and view the signal meter on the TV screen while installing or adjusting your satellite dish. It's designed to work with DSS, DBS and C-band dishes, including DISH Network and DIRECTV.