Outdoor POTS Splitter- Suttle outdoor DSL POTS (Plain Old Telephone Service) splitter -Allows voice and data signals to travel over the same telephone line and be separated at the customer premise- Splits the incoming signal to provide separate outputs for filteredvoice (phone) and ADSL (data) in the form of screw terminals- Designed to be mounted on a wall or conduit next to a Network Interface Device (NID)- Outdoor housing for protection from environmental conditions- Mounts to wall or conduit- Terminals for Network, Voice, and Data- ANSI T1.413 compliant- FCC Registered; Complies with Part 68, FCC RulesSE649A1 - Usually Categorized as SUTTLE 1 : Installation Equipment : Miscellaneous Installation Accessories
Specifications: -HDMI Version: 1.4a -Video Amplifier Bandwidth: 140 MHZ -Input Video Signal: 0.5-1.0 colts p-p -Input DDC Signal: 5 volts p-p (TTL) -Support resolution: Up to 1080p -Support Vedio Format: 640x480; 800x600; 1024x768; 1280x1024 -DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p -Output Video: HDMI+HDCP1.0/1.1 -Vertical Frequency Range: 60 Hz -Power Supply: 5V DC CONNECTION: Connect the input source and output displays to the HDMI Splitter .Please refer to the Connection Image. Connect the DC 5V power supply to the splitter. Please kindly note that power supply with higher voltage may damage the splitter. When input source and output displays are connected and turned on, the corresponding LED will light. Attention: In order to protect the splitter and your devices, p lease make sure the splitter is powered off before you attach in or extract video source and displays . Please insert and extract HDMI cables gently. FAQ: The splitter doesn't appear to be functioning? "Firstly, check if the LED lights, if the power supply is in good condition and well connected. Secondly, make sure all cables are in good condition and well connected. Thirdly, make sure the length of the cables is within the maximum supported length of this splitter. Lastly, please try to connect the input source to the display directly to see if it display normally. " If the maximum resolution the two displays supported is not the same, what resolution be displayed? The splitter will display at the lower one to both displays Package includes: 1x HDMI 1x2 Splitter 1x Power Adapter 1x User Manual
Description: This reliable splitter will take any HDMI signal (rev 1.3b) and duplicate the signal, sending the same high definition signal to 4 displays simultaneously. Specification: •Video Amplifier Bandwidth: 2.5 GHz •Input Video Signal: 0.5-1.0 volts p-p •Input DDC Signal: 5 volts p-p (TTL) •Maximum Single Link Range: 1920 x1200-1080p •Video Format Supported: VGA: 640x480, 1024x768, 1280x1024 •Video Format Supported DTV/HDTV: 480i/576i/480p/720p/1080i/1080p •Output Video: HDMI + HDCP1.0/1.1/1.2/1.2a/1.3 •Vertical Frequency Range: 60Hz/85Hz •Weight: 426g Package Includes: • HDMI 1x4 Splitter •5V DC Power Supply •User Guide
TBS®2212 1x2 Port HDMI splitter distributes 1 HDMI source to 2 HDMI displays simultaneously and allows transmission of high-resolution video and digital audio. Features: • Split one HDMI input signal to two HDMI output signals identical to the input signal •The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation •Support 3D & 1080P HDTV. •Support 4Kx2K Specification: •Video Amplifier Bandwidth: 2.5Ghz •Input Video Signal: 0.5-1.0 volts p-p •Input DDC Signal: 5 volts p-p (TTL) •Maximum Single Link Range: 1920 x1200-1080p •Video Format Supported: VGA: 640x480, 1024x768, 1280x1024 •Video Format Supported DTV/HDTV: 480i/576i/480p/720p/1080i/1080p •Output Video: HDMI + HDCP1.0/1.1/1.2/1.2a/1.3 •Vertical Frequency Range: 60Hz/85Hz •Weight: 220g Package Includes: • HDMI Splitter •5V DC Power Supply •User Guide
IOGear's GVS72 2-port VGA video splitter and a signal booster with IOGEAR's patented VSE (Video Signal Enhancement) Technology. It is the best choice for splitting and carrying a video signal to more that one display with the same quality as the original signal. The GVS72 VGA Video Splitter is used to take video input from a single source and direct it to two video outputs for monitors using analog signals.
Tensun HDMI Switch 4K 2x1 or 1x2 HDMI Bi-Directional Switcher Splitter Selector Box Support HDMI V2.0 3D 1080P
Color: 1 in 2 out/ 2 in 1 out
This Tensun 4K×2K HDMI 2 Ports Bi-directional Switch for HDTV, Blu-Ray, DVD, DVR, Playstation Xbox and PS3/PS4. It can easily connect two routes of HD Source to any one HD display or projector. Also it can distribute one HD Source to two HD Display or projector. A simple switching button design lets you easily move from one to the other and back. It also supports 3D. Specification: Interface: 2 HDMI-Hosts to 1 HDMI port; 1 HDMI-Host to 2 HDMI port Compatible with HDMI Specification 1.4 (or previous HDMI 1.0, 1.1, 1.2 and 1.3) Supported resolutions: 4K X 2K/1080p/1080i/720p/576p/576i/480p/480i Supports PCM2, 5.1, 7.1CH, Dolby Digital 5.1, DTS5.1, Dolby TrueHD, DTS-HD Master Audio Supports up to 48-bit deep color Support 3D No external power required LEDs indicate port usage Simple switching features Package Contents: 1 x HDMI Bi-Directional Switch 1 x User's Manual Note: In order to get 4K@60Hz resolution, please use HDMI version 2.0 & less than 1.5M cable to make video smooth.
Tensun Mini HDMI Splitter 1 In 2 Out (1x2) Amplifier V1.3 with Full HD 1080P&3D(One Input to Two Output), Compatible With PS3/PS4 Xbox DVD Blu-ray Apple TV Fire TV Roku 4
Color: 1 In 2 Out HDMI Splitter
This Tensun 1×2 HDMI splitter will take any HDMI signal (rev 1.3) and duplicate the signal, sending the same high definition signal to 2 displays simultaneously. Features: Input Port: 1 x HDMI Input Port; 1 x DV/5V Port Ouput Port: 2 x HDMI Out put port HDMI Version: 1.3 Input Video Signal: 0.5-1.0 colts p-p Input DDC Signal: 5 volts p-p (TTL) Support resolution: Up to 1080p Resolution DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p EDID Duration: 4 seconds Vertical Frequency Range: 60 Hz Power Supply: 5V DC Package Contents: 1 x Tensun 1 x 2 Port HDMI Splitter 1 x DC 5V/1A Power Adapter 1 x User's Manual
This is a 4-port VGA splitter which sends VGA signal to up to 4 VGA displays at the same time. It is compatible with VGA, XGA, SVGA, UXGA, WUXGA and multisync monitors and enables up to 64 monitors to share the information of a host computer simultaneously by daisy chaining. It is also a boosting device that extends the video signal transmission distance up to 147 feet, making it an excellent choice for education, security system, public system or video broadcast systems.
This is a 2-port VGA splitter which sends VGA signal to dual VGA displays at the same time. It is compatible with VGA, XGA, SVGA, UXGA, WUXGA and multisync monitors and enables up to 8 monitors to share the information of a host computer simultaneously by daisy chaining. It is also a boosting device that extends the video signal transmission distance up to 147 feet, making it an excellent choice for education, security system, public system or video broadcast systems.