Solid Signal Digiair Pro ATSC TV Antenna Signal Meter Spectrum Analyzer (DIGIAIR-PRO-ATSC)
Manufacturer: Solid Signal
Brand: Solid Signal
This is the industry's leading TV antenna signal meter. Want to get the most TV antenna broadcast channels in your area? This TV antenna signal meter will help you locate and lock onto all available channels faster and easier. Look no further than the Digiair Pro!
Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode. In digital mode it displays the BER (bit error rate) and SNR (signal/ noise ratio). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do. Furtermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker. DIGIAIR Pro is very sensitive and can detect even the weakest signals. DIGIAIR Pro can feed Voltage (5/12 Volt) to external active antennas this feature is short-circuit protected by an automatic fuse. DIGIAIR Pro is charged via an external DC power-source of 13,5 -18 volt. Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design. DIGIAIR Pro operates with 8xAA rechargeable batteries. The unit will works for at least 2 hours with fully charged batteries
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) WS-6903 Digital Satellite Finder Meter LCD Display TV Signal Finder.Main Function:For the systems without automatic satellite tuning capability.Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.Meter with LED displayer helps you know the strength of the signal clearlyMeter with audio tone helps you align satellite antenna to signal. Audio signal gets louder at the best setting.Works with multiple dish systems.Close or open the audio toneWith four steps gain for the satellite signal,you can increase or decrease the gain of the meterSpecificationsFrequency Range: 950-2150 MHZSupply Voltage: 13-18V DCInput Level Range:-40dBm~~-10dBmOperating Temperature: 0~~+40CImpedance: 75?
The SF-95 Satellite Finder is the most useful tool in Satellite TV installation includes DirectTV, DishNetowrk, Bell ExpressVu, FTA and Satellite Internet systems. Designed with SMT technology, its superior sensitivity is capable to indicate signal from 0.2dB to 2300MHz. It is operated by LNB power. A built-in buzzer sounds higher pitch when dish gains higher signal. The SF-95 is complied with EMC directive and CE qualified. Good for home usage.
SATlink WS-6923 Digital Satellite Signal Finder, Support DISEQC 1.0/1.1 ,0/22khz Tone, Black
Features:* Digital meter for signal strength and quality* Sound and Light Alarm for Locking Signal* Auto Calculate Angle of AZ ,EL* Supports DISEQC 1.0/1.1 ,0/22khz Tone* Beep Integrated* LNB short protect* Software upgrade via USB port* Easy to carryTechnical Specifications:TRANSMISSION STANDARDS: DVB-SSATELLITE INPUT/DEMODULATIONConnector Type: F TypeInput Frequency: 950 to 2150 MHzSignal Input Level: - 65 to -25 dBmBand Switch Control: 22KHzLNB Supply: 13V/18V, IMax300mADemodulation Type: QPSKSymbol Rate: 2
D9833 is a low-power, frequency programmable sine, triangle and square wave generator. Waveform generator widely used in a variety of measurements, such as the field of motivation and time-domain response. Output signal frequency and phase are programmable, so that the output signal frequency and phase is very easy to adjust. Do not need any external devices. Frequency registers 28BIT bit, if the base frequency input 25MHZ, the smallest output precision 0.1HZ. Similarly, if the reference frequency input 1MHZ, the smallest output precision 0.004HZ. Packages: 1 x AD9833 DDS Signal Generator Module
This is a professional meter for professional man or who knows much about TV Setting.Description: Display: 128X64 LCD Display with backlight Solution: GX1132+AV2012 Shows both S/N and C/N Shows strength and quality readings Sound alarm when lock signal Show numerical reading and bar reading DVB S/S2 satellite finder Can be used in all country Two color led show status, When it is incharging status,Led is in red, When it catched the signal, Led is green Global satellites and TP reploaded Support DirectTV 1.0 Support multiple satellites/tp blind nd Nit scan Digital meter for signal strength (in numerical and #118alue and picture) Easy satellite manager (EDIT, delete and SCAN) Edit TP, frequency, LNB switch, symbol rate and more Completely programmable by the user Input frequency: 950 to 2,150MHz Input level: -65 to 25dBm Input impedance: 75 Ohms Automatic calculate angle: AZ, EL Upgrade: S/W by PC DisEqC control 22kHz control Fast charge Li-ion battery (1700mAh), can last 4 hours Indicator symbol: 13/18V Indicator symbol: 22kHz USB port for software upgrades USB software upgrade cable included 12V DC power charger included Coxial cable included Interface: LNB IN/RS232/DC12V Buttons: Menu/Return/up/down/left/right/switch on/off Package List: 1 Handheld LCD Digital Satellite Finder/CARTON Size(WxDxH): 178.9*81.9*35.4MM Gift Box Size(WxDxH):236*110*75MM Accessories Standards: 12V ,1A adapter/Manual/USB-RS232 cable Optional: Compass
Trimax SM-4500 Digital Satellite Meter FTA Dish Network DTV
For the first time in a economical digital meter, you are able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter.
In this model we have eliminated the troublesome 'register code'. You will no longer need the code when resetting your meter.
Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade.
English, Italian, Portuguese, Turkish, Swedish, Spanish, Deutsch, French, Dutch, Finnish, Arabic, Denish, Russian, Czech, Greek, Lietuva.
Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.
Remember to Register your me