Digital Dictation Software: In a world of information overload, being able to dictate with speed and accuracy is a necessary productivity tool. NCH Software has developed a number of professional dictation and transcription programs, each specifically designed for a particular task including voice recording, transcription, typing assistance and more.
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) WS-6903 Digital Satellite Finder Meter LCD Display TV Signal Finder.Main Function:For the systems without automatic satellite tuning capability.Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.Meter with LED displayer helps you know the strength of the signal clearlyMeter with audio tone helps you align satellite antenna to signal. Audio signal gets louder at the best setting.Works with multiple dish systems.Close or open the audio toneWith four steps gain for the satellite signal,you can increase or decrease the gain of the meterSpecificationsFrequency Range: 950-2150 MHZSupply Voltage: 13-18V DCInput Level Range:-40dBm~~-10dBmOperating Temperature: 0~~+40CImpedance: 75?
SATlink WS-6923 Digital Satellite Signal Finder, Support DISEQC 1.0/1.1 ,0/22khz Tone, Black
Features:* Digital meter for signal strength and quality* Sound and Light Alarm for Locking Signal* Auto Calculate Angle of AZ ,EL* Supports DISEQC 1.0/1.1 ,0/22khz Tone* Beep Integrated* LNB short protect* Software upgrade via USB port* Easy to carryTechnical Specifications:TRANSMISSION STANDARDS: DVB-SSATELLITE INPUT/DEMODULATIONConnector Type: F TypeInput Frequency: 950 to 2150 MHzSignal Input Level: - 65 to -25 dBmBand Switch Control: 22KHzLNB Supply: 13V/18V, IMax300mADemodulation Type: QPSKSymbol Rate: 2
The SF-95 Satellite Finder is the most useful tool in Satellite TV installation includes DirectTV, DishNetowrk, Bell ExpressVu, FTA and Satellite Internet systems. Designed with SMT technology, its superior sensitivity is capable to indicate signal from 0.2dB to 2300MHz. It is operated by LNB power. A built-in buzzer sounds higher pitch when dish gains higher signal. The SF-95 is complied with EMC directive and CE qualified. Good for home usage.
First Strike Meters FS1 Pro HD Digital Satellite Finder
Manufacturer: DMS International
Brand: First Strike
If you have always wanted a professional satellite finder meter but didn't want to pay the "BIG BUCKS", this is the meter for you. First Strike Meters are made for the professional but are easy for the Novice to understand and use. No more searching through complicated menus to find the setting you need to change. All parameters show on one screen making it easy for the user to modify any setting. Don't let the price fool you, the FS1 First Strike satellite finder meter will give you all the signal measurements that you need to install or re-align your satellite dish at a price you can afford. FS1 quickly and easily finds even weak signals. Unlike the competitors meters, you can do a sweep of the dish to find the signal. Uses the same type display screen as cell phones so it can be read in direct sunlight. Display screen has a switchable back light so your meter can be used in low light conditions. FS1 has a Global Data Bank that holds all the satellites in a separate data bank. The meter also has a User Defined Data Bank that stores 100 satellites. Entries in the Global Data Bank can be copied to the User Defined Data Bank and then easily edited to fit your needs. The user can define new entries from the keypad. Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence. Rechargeable Li-on battery lasts approximately 3.5 hours on a full charge. If the battery runs low during use, you can loop the satellite receiver through the meter and power the meter from the satellite receiver power supply. Meter housing has a battery door for easy access and replacement of the battery. Comes with a "Ruff Neck" protective jacket to protect your meter on the job. Universal charger operates on 120vac/60Hz or 220vac/50Hz making it usable anywhere. Easy change power plug.
Screen size: 1.2 x 5.5cm;
The digital satellite finder is microprocessor controlled, making it very reliable and accurate. Signal strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0~99). It can also present pitch tones (the higher tone the better signal) on a buzzer. The digital satellite finder is very sensitive and can detect the weakest of signals, strong incoming signals (powerful satellite, big dishes) can easily be attenuated for better readout.
Other Features Input frequency: 950~2150 MHz; Min. Input level: -40dBm; Max. Input level: -10dBm; Input impedance: 750 Ohm, F-connector; Output impedance: 750 Ohm, F-connector; Power supply: DC 13~18V; Operating range (LNB gain): 52-62dB
Dimensions & Weight
Dimensions:3.94 in x 2.56 in x 0.67 in (10 cm x 6.5 cm x 1.7 cm)
Weight:4.94 oz (140 g)
1 x Satellite finder
1 x English user manual
Jrelecs WS-6903 Digital Satellite Finder Meter LCD Display TV Signal Finder
Manufacturer: J&R Electronics Company Limited
Jrelecs WS-6903 Digital Satellite Finder Meter LCD Display TV Signal Finder.
For the systems without automatic satellite tuning capability.
Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.
Meter with LED displayer helps you know the strength of the signal clearly
Meter with audio tone helps you align satellite antenna to signal.
Audio signal gets louder at the best setting.
Works with multiple dish systems.
Close or open the audio tone
With four steps gain for the satellite signal,you can increase or decrease the gain of the meter Specifications
Frequency Range: MHZ
Supply Voltage: 13-18V DC
Input Level Range:-40dBm~~-10dBm
Operating Temperature: 0~~+40C