The Holland POE filter was developed specifically for use on CATV subscriber premise internal coaxial wiring. The filters purpose is to BLOCK MoCA network generated data streams from exiting the subscriber's dwell and interfering with other neighborhood MoCA networks. The Filter also improves MoCA network's throughput by improving the data paths micro reflections.
Bandstop provides a typical 35-45dB of rejection in the MoCA 1125-1525Mhz band.
IEEE 6KV A3 surge survivablity is provide for additional network protection.
Device's technology is recommend for TiVO Whole House DVR applications.
Signal loss in the Cable TV ops band of 5-1002MHz is 1.5dB or less
Approved for use in TWC cable systems & other providers including TiVO utilizing MoCA for whole house DVR apps.
Product Information Specifications for Filter, MoCA "POE" Filter for Cable TV Coaxial Networking ONLY Below:
Heavy-duty 3 foot galvanized satellite tripod. For use with 2 O.D. mast. Mounts DIRECTVs Slim Line models SL3, SL5, AT9, AU9-S. It can also be used as a support for an off-air VHF/UHF antenna.
The PVTP3U is a heavy-duty tripod used to mount satellite antennas or off-air antennas. It is super sturdy, made of 18 gauge steel. The 3 tripod includes a 28 long center universal support pole which is 2.0 O.D. on one end and 1 5/8 O.D. on the other end.
This is the newest generation of the Prosumer Series HDMI Splitter from ViewHD to support Ultra HD / 4K and advanced video and audio applications beyond the reach of regular HDMI splitters. It does not support ARC and Ethernet. This advanced Prosumer UltraHD | 4K HDMI 1X4 Splitter can support 4 HDMI displays at the same time with video resolution up to Ultra HD / 4K (4096x2160@24fps or 3820x2160@30fps). It also provides advanced video and audio features beyond the capabilities of regular HDMI splitters to deliver unparallel feasibility for various video and audio applications; and it comes with a remote control. + HDMI outputs support all advanced HDMI audio formats up to HDMI v1.4 specification + The splitter can be fully operated by the remote control unit + Full array of LED lights to indicate the setting and I/O status + Support AWG26 HDMI cable up to 15metres @ 1080P & 3D; 5 meters @ Ultra HD / 4K + Full metal jacket construction for durability and better heat dissipation HDMI splitter does not change incoming audio & video format. HDMI output audio will be identical to the audio signal in the HMDI input. The 3.5mm and SPDIF audio outputs are extension of HDMI output #4. HDMI output #4 must be active and the incoming HDMI signal must be v1.3, aka, 1080P or 3D (not a 4K signal) and the incoming audio format must be supported for them to work correctly. For the amplified 3.5mm analog audio output to have sound, the incoming HDMI audio must be 2CH stereo or mono. ...
The latest ViewHD splitter v1.3 certified with 3D support. For upto 4 displays to share one video source.
Genuine ViewHD HDMI 1x4 splitter sold by J&R Galaxies. ViewHD splitters are the best on the market.
* Support one to four outputs at the same time
* Support 3D video (To get 3D, all units connected to splitter outputs must support 3D)
* Support deep color 30bit, 36bit & XvYCc
* Support various audio formats (Note: To get Surround Sound, all units at the outputs must support the selected surround sound format)
* Support Blu-Ray players, for 24fs film format (Note: for 24fs film, display must support 24fs, otherwise it will display 50/60fs pictures)
* Support CEC
* Support input cable distance up to 15m HDMI AWG26
* Support output cable distance up to 25m HDMI AWG26
* Support HDMI signal retiming, no loss of quality
* Include DC5V 100-240V universal power adapter with US plug
* Operating Temperature Range: -15C to +55C
* Size: 115mm x 60mm x 25mm
* Serviced by J&R Galaxies 30 day no restocking fee return policy and ViewHD one year warranty
* Light Status: output light will be RED if the content is not HDCP protected; BLUE if the content is HDCP protected; No light means output is not active.
* Per HDMI protocol, unit with the lower video and audio formats connected to the single HDMI video source will be supported. This is determined by HDMI video source unit, not determined by HDMI Splitter.
* For example: 1) The HDMI video so...
Use this to switch between cable TV, satellite, video games and other home video products with F-type coax connections. Isolation is in excess of 90 dB to eliminate interference from external devices and crosstalk between connected devices. Very easy to install with included hardware.
KING VQ4500 Tailgater Portable/Roof Mountable Satellite TV Antenna (for use with DISH)
Take your DISH Satellite TV Service anywhere in the continental US! The new KING Tailgater is a fully automatic portable HD Satellite Antenna that sits on the ground OR permanently mounts to the roof of your RV. The Tailgater is ideal for RVers, sporting and outdoor enthusiasts, Tailgaters, Long haul truckers or anyone with an active mobile lifestyle. Enjoy SD or HD DISH Satellite programming no matter your destination (does not provide service while moving). Enjoy your favorite TV programing anywhere, anytime. Special DISH Solo HD Satellite receiver not included. Kit includes antenna and coax cable only. Compatible with DISH HD Solo receivers (411, 211, ViP211K and ViP211Z). DISH satellite service required; no long term contract necessary. Made in the USA.
DIRECTVs new all-in-one solution for providing wireless connectivity for those who do not have a coaxial connection near their home network.It combines the function of a traditional wireless networking adapter and a Broadband Cinema Connection Kit.
AC line separator provides temporary separation of conductors for current measurement with clamp-type meters. Simply plug the separator into a grounded 120 VAC receptacle, plug in your equipment and turn it on, then measure.
Southwire 56918445 500-Feet Quad Shields Type RG 6/U 18 AWG Coaxial Cable, Black
18-Gauge RG 6/U Quad Shield Type CATV UL Approved Coaxial Cable. Solid bare or Copper Conductors. PVC Insulation. 95-Percent Copper Braid, 300-Volt. Quad Shields Type RG 6/U Swept to 3.0 GHZ Southwire Saber Link E198892 CM/CL2/CATV 18 AWG UL cUL CMH Made in U.S.A. RoHS compliant. Southwire Quad Shield Type RG 6/U Coaxial Cable is made of: 1-18 AWG copper clad steel .040-Inch Conductor, 70 mil wall of foamed polyethylene to a nominal diameter of .180-Inch Dielectric, Bonded aluminum / polyester / aluminum tape wrap shield, 34 AWG aluminum braid with 60-Percent coverage, aluminum / polyester / aluminum tape wrap shield, 34 AWG aluminum braid with 40-Percent coverage, 30 mil black 80-Degree C flame retardant polyvinyl chloride to a nominal diameter of .300-Inch jacket, Rated for outdoor use and sunlight resistance.-Voltage Rating: 300-Volt, D.C Resistance Nom: 30.41 OHMS per 1000-Feet at 68-Degree. F, Velocity of Propagation Nom: 79-Percent, Impedance Nom: 75 OHMS, Capacitance Nom: 18 pF/ft. Southwire Quad Shield Type RG 6/U Coax Black Cable is permitted for use with Audio/Video, Radio Frequency, and CATV/MATV Transmissions. Southwire Type RG6 Coax White Cable is UL Listed, RoHS Compliant, and meets the following applicable requirements:UL Standard 444, UL Standard 13, UL 1685 UL 1581 Vertical Tray Flame Test, NEC Article 800, Article 725. Southwire provides a full line of products, in both copper and aluminum, for a wide range of applications. The company leads the industry in ...