VideoSecu Tilt Swivel TV Wall Mount 32"- 55" LCD LED Plasma TV Flat Screen with VESA 200x200,400x400,up to 600x400 mm, Full Motion Articulating Dual Arm Mount Fits up to 24" Studs MW365B2 C20
The VideoSecu dual arm articulating wall mount constructed with solid heavy duty steel, support most 32" - 65" flat screen TV with mounting hole pattern up to 24 inch wide and 16 inch high (VESA 600x400 600x300 600x200 500x300 400x400 400x300 400x200 300x300 300x200 200x200 200x100mm). Dual arm design allows forward or backward tilt, 160 degrees side-to-side swivel (The max degree is depending on your display size) and extends the flat panel screen up to 16" from wall to achieve vast range of viewing angles. Post installation level adjustment allows left and right rotation for perfect level in different view angles. The wall plate is more than 24" wide, so it is easy to mount into studs up to 24" (standard stud is 16"). Additionally, security screws lock the TV bracket to the wall mount from the bottom. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 135lbs. Next, mounting holes distance on the rear of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Last, your TV should be at least 32 inch wide. Otherwise, you will see the bracket. Note:Please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs. This mount will not work for some 55-65 inch TVs manufactured 2013 years ago. Please check TV VESA and weight.Notice: This mount fits most 32-55" TVs, some up to 60 65 inch TVs manufactured in recent 3 years.
VideoSecu 24" Long Arm TV Wall Mount Low Profile Articulating Full Motion Cantilever Swing Tilt wall bracket for most 22" to 55" LED LCD TV Monitor Flat Screen VESA 200x200 400x400 up to 600x400mm MAH
The videosecu TV mount is a mounting solution for most 22"-47" LCD LED Plasma TV and some LED up to 55" with VESA 600x400mm (24"x16"), 400x400mm (16"x16"), 400x200mm (16"x8"),300x300mm (12"x12"),200x200mm (8"x8"),200x100mm (8"x4") mounting hole pattern .Heavy gauge steel construction provides safety loading up to 66lbs display .It can tilt 15 degree forward or backward and swivel 180 degree. The removable VESA plate can be taken off for easy installation. Post-installation level adjustment allows the TV to perfectly level. The on arm cable management ring system design, guides wires and prevent cable pinching. Standard hardware and user manual included.
VideoSecu Articulating TV Wall Mount Bracket for 26"-55" LCD LED Plasma 3D TV with VESA up to 400x400, Full Motion Tilt Swivel Dual Arms BD4
The MW340B makes it easy to wall-mount and position your LED LCD TV. This full-motion bracket can support most TVs from 26"-47" and Some up to 55" Display with VESA mount hole up to 400x400 (16 inch apart). The arm pulls out to extend your TV up to 16" from the wall. The mount lets you swivel, tilt it up or down your TV for optimal viewing. This mount fit most brand TV with mounting thread inserts (VESA) 400x400,400x300,400x200,300x300,300x200,200x200,200x100,100x100mm (16"x16"/16"x8"/8"x8"/16"x12"/12x12"/12"x8"/8"x4"/4"x4"), up to 135 lbs., common mounting hardware included.
VideoSecu Low Profile TV Wall Mount Bracket for Most 32" - 75" LCD LED Plasma HDTV, Compatible with Sony Bravia Samsung LG Haier Panasonic Vizio Sharp AQUOS Westinghouse Pioneer ProScan Toshiba 1NN
The low profile mount MF601B is compatible with LED, LCD, Plasma TVs and other flat panel displays measuring between 32 and 75 inches. Supports all VESA mounting standards 600x400, 600x200, 500x300, 400x400, 400x300, 400x200, 300x300, 200x200 and many odd size mounting patterns (mounting holes on the rear of the TV or panel should be no more than 23.6" inches horizontally and up to 16" vertically). The sturdy steel construction offers up to 165 lbs loading capacity. The open wall plate design get the cables routing while its low-profile design places the TV nearly flush to the wall for a clean appearance. Security screws hold TV securely in the wall plate. Standard mounting hardware included. Notice: This mount fits most 32-60" TVs, some up to 65 70 75 inch TVs manufactured in recent 3 years
Mount-It! MI-303B Heavy-Duty Tilting and Locking Low Profile LCD, LED, or Plasma Wall Mount (60" Screen size)
Durable TV Mount. Looking for a sturdy, well-engineered, TV mount, for a 32" to 60 inch TV for your home or office? Rest assured the MI-303B will safely, secure your precious flat screen television to any wall. This sturdy TV mount, has a high tech, sleek design, which sits 3.1 inches away from the wall, with two adjustable brackets that tilt up to 15 degrees. This durable TV mount is great for improving the appearance of any room, with the convenience of tilting your TV screen to a comfortable viewing angle. Mount-It on Any Wall. This durable, heavy-duty TV wall mount, is one of our top selling tilting wall mounts. The MI-303B sits 3.1 inches away from the wall, giving your home or office that stylish, sleek, space-saving appearance. With its thick-grade steel construction, and it easy-to-turn adjustable tilt knobs on the adjustable brackets, you can securely tilt your TV up to 15 degrees both up and down to optimize your viewing angle from your seating area. Construction. The Mount-It MI-303B, is built with the most up-to-date methods on framing construction to ensure the safety of your TV as well as to prevent your TV from sagging. Our mount is constructed with a thicker grade of steel compared to other TV mounts that are sold on Amazon, which gives our mount more steadiness, with its rigid reinforced wall plate, and its two adjustable brackets that can safely hold your flat screen TV up to 175 lbs. The MI-303B features a thick grade of steel, which is powder coated, a built-in bubble level, two easy-aligned brackets, two adjustable tilt knobs on the brackets, and a unique wall plate that can be mounted onto two wood or metal studs, or a brick/concrete wall. It comes with all of the necessary hardware, which makes this mount ready-to-assemble. Also, the wall plate dimensions are 30" (W)x 9.5" (H), the brackets are 20" (L) and it supports VESA 600x400mm.
Cheetah Mounts ALAMB Articulating Arm TV and LCD Monitor Wall Mount, for 12 to 24" Displays up to 40 Lbs, Includes a Twisted Veins 10 Foot HDMI cable
Please see the key features section above for important information. This section contains additional information. This mount, the ALAMB, is best suited for small computer monitors or TVs up to about 24". It CAN be used for many of today's displays up to 32" as long as they use a VESA 100 hole pattern and weigh less than 40lbs. However, Cheetah also makes a larger version of this mount, the ALAMLB, which is sold separately at Amazon and which is recommended for displays larger than 24". If you do opt for the ALAMLB for the larger displays, you will also get 21" of extension versus the 14" on the ALAMB, plus the option of VESA 200 and 400 should you need to upgrade in the future. The ALAMB mount weighs less than 5lbs. Most of today's displays in the 24" and under category weigh less than 15lbs with their pedestal bases removed. Thus, it is typically the case that this mount and display can be mounted by a single person. It IS possible for the TV plate to be attached to the back of your display and for the wall plate and arms to be attached to your wall and then for the two sections to be combined in the most convenient "lift and lock" mounting method. To mount into wooden studs, it is recommended to drill a pilot hole which does require a drill and a drill bit. Similarly, to mount into masonry, a drill and masonry bit is required. The rest of the hardware and tools required are fairly standard. Should you encounter any problems with your mount, in addition to Amazon's seller support and return policies, Cheetah Mounts' authorized sellers all have staff trained in the details of these mounts and are ready to assist. Simply message your authorized seller through Amazon. All Cheetah Mounts come with 100% lifetime guarantees.
Mount-It! TV Wall Mount Full Motion and Heavy-Duty, Swivels and Tilts, for LCD LED Plasma 32" - 60" Screens, 175 lb Weight Capacity, 6 Ft. HDMI Cable Included, Black (MI-310B)
Mount-It! heavy-duty full motion articulating TV wall mount offers extreme versatility with a maximum extension of 20.3 inch from the wall. Its dual arm design is incredibly sturdy. This mount is a beast that will safely carry your TV. Dual TV safety screws are included to prevent accidental liftoff of the display. The use of heavy gauge metal minimizes sagging even fully extended. Compare pricing to any other articulating TV wall mount on Amazon. MI-310B swivels from left to right for viewing from multiple angles. Ideal for corner installations. Powder coated steel construction provides a sleek, high-tech look. Mount-It! experience and guarantee. Mount-It! is the expert in television and computer monitor mounts. We apply our decade long experience in this field to offer the best features at value prices. All our products are designed for heavy-duty performance. Contact our friendly customer support team for any questions or issues. Features: Fits most of 32-60 inch TVs Specifications: Large extension capability is ideal for entertainment center installation. Tilt, Swivel and Extend/Collapse function Easy tilting angle adjustment Heavy duty steel construction and high-tech welding technology Built-in bubble level makes leveling work easy and convenient includes all necessary mounting hardware TV Size Range: 32" - 60" (some even up to 75" depending on VESA bolting pattern and the TV weight) Max TV weight: 175 lbs Mounting Pattern: Universal and fits VESA 750x450, 750x450, 700x400, 600x450, 600x400, 600x300, 600x200, 400X400, 400X300, 400X200, 300X300, 300X200, 200X200, 200X100, 200X150, 100X100, 75X75mm Mounting Holes: up to 30 inch apart horizontally and up to 17.5 inch vertically Wall plate dimensions: 19.75 in wide by 9.5 in high.
Mount-It! MI-310L Full Motion TV Wall Mount Bracket Heavy-Duty Articulating Corner Stand for 50 55 60 65 70 In
Mount-It! heavy-duty full motion articulating TV wall mount offers extreme versatility with a maximum extension of 20.3 inch from the wall. Its dual arm design is incredibly sturdy. This mount is a beast that will safely carry your TV. Dual TV safety screws are included to prevent accidental liftoff of the display. The use of heavy gauge metal minimizes sagging even fully extended. Compare pricing to any other articulating TV wall mount on Amazon. MI-310L swivels from left to right for viewing from multiple angles. Ideal for corner installations. Powder coated steel construction provides a sleek, high-tech look. Mount-It! experience and guarantee. Mount-It! is the expert in television and computer monitor mounts. We apply our decade long experience in this field to offer the best features at value prices. All our products are designed for heavy-duty performance. Contact our friendly customer support team for any questions or issues.0020 Features: Fits most of 40-70 inch TVs Large extension capability is ideal for entertainment center installation. Tilt, Swivel and Extend/Collapse function Easy tilting angle adjustment Heavy duty steel construction and high-tech welding technology Built-in bubble level makes leveling work easy and convenient Includes all necessary mounting hardware Specifications: TV Size Range: 40 to 70 inch (some even up to 80" depending on VESA bolting pattern and the TV weight) Max TV weight: 220 lbs Mounting Pattern: Universal and fits VESA 800x450, 800x400, 750x450, 750x450, 700x400, 600x450, 600x400, 600x300, 600x200, 400X400, 400X300, 400X200, 300X300, 300X200, 200X200 mm Mounting Holes: up to 34.5 inch apart horizontally and up to 17.5 inch vertically Wall plate dimensions: 19.75 in wide by 9.5 in high.
Sewell Direct Universal Soundbar Bracket
This Universal sound bar bracket lets you hang your sound bar above or below your LCD TV. This VESA compliant sound bar bracket is designed to work with almost any TV and sound bar. Constructed with high quality steal the brackets will hold up to 33lbs. Easy installation takes only minutes. Sound bars are a great way of improving the sound quality of your home theater without having to find a place to put multiple speakers. For the best effect sound bars should be placed close to your TV. One major problem that arises is that the sound bar can get in the way of your screen or even block the IR signals from your remote. The universal sound bar bracket from Sewell provides an ideal solution for this problem. By placing the sound bar above or below your TV you can enjoy the improved audio from the sound bar without it getting the way. This sound bar bracket can be used for TV's on a stand or wall mounted. Installation is simple and takes only a few minutes. First look at the mounting holes on your TV and sound bar then determine how to position the brackets to fit the mounting holes. Use the included hardware to attach the brackets to the TV. Loosely tighten the screws so the brackets can still be adjusted. Then attach the sound bar to the brackets and loosely tighten the screws. Make sure the position of the sound bar is correct then tighten the all screws and you are done.
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!