Technical Information - Frequency Range - 2000 kHz to 2150 MHz; Signal Loss - 2 dB - Insertion; Input Voltage Range - 100 V AC to 120 V AC; Interfaces/Ports - Ports - F-type; Manufacturer - DIRECTV; Manufacturer Part Number - PI21; Manufacturer Website Address - directv; Brand Name - DIRECTV; Product Model - PI-21; Product Name - PI-21 Power Inserter; Product Type - Signal Amplifier; Miscellaneous - Compatibility - DIRECTV Slim Line Dish Antenna; Frequency Range - 2000 kHz to 2150 MHz; Signal Loss - 2 dB - Insertion; Input Voltage Range - 100 V AC to 120 V AC; Interfaces/Ports - Ports - F-type
Technical Information - Frequency Range - 2000 kHz to 2150 MHz; Signal Loss - 2 dB - Insertion; Input Voltage Range - 100 V AC to 120 V AC; Interfaces/Ports - Ports - F-type
Motorola Signal Booster 2-Port BDA-S2 Cable Modem TV HDTV Amplifier
There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. Motorola BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-K1/RA where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Motorola, how can you go wrong? The BDA-K1/RA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. Active return may not fix all of your problems if the product is not installed properly - or if the incoming cable signal is not problematic.
The KING SureLock Digital TV Signal Finder offers a fool-proof way to locate the strongest available TV signal(s) no matter where you are. If your TV antenna can receive the signal, the SureLock SL1000 can help you point your antenna to maximize it! Rotating your directional TV antenna can be time-consuming. Unless you are pointed at the correct TV tower, you won’t get best reception when doing a TV channel scan. But you don’t know if you are pointing your TV antenna towards the correct tower unless you complete a full channel scan. It’s time to know where to aim your TV antenna before you do your channel scan, and the KING SL1000 can help. The SureLock SL1000 was designed to simplify the TV antenna aiming process and ease your frustrations. The meter connects in-line with your over-the-air TV antenna via coax input and output connections and provides bright LED feedback for signal strength measurements. The SL1000 also has a variable sensitivity adjustment to allow you to work with all TV transmitting towers, both near and distant. Look for the strongest TV signal and lock your antenna in!
Satellite Oasis Directv Hd Satellite Dish Rv Tripod Kit
The Directv HD Satellite dish RV tripod kit from Satellite Oasis is the perfect cost effective solution for taking your Directv satellite service with you on the road. If HDTV is what you're after while traveling, this is the ticket. Detailed Satellite Oasis instructions are included with every kit. B band converter may be required to receive certain HD channel on certain receive models (SUP-2400 sold seperately). If you don't need HDTV on the road, we suggest looking at getting a DTV18SKIT. The DTVKAKUSKIT will work on any Directv receiver except for the HDTV receiver models: H25, HR34, C31, C41, or Genie receivers. For those style receivers, a Satellite Oasis model DTVSWMSKIT is required.
This AC Line Splitter provides a fast and easy way to "Split" standard 120V/240V AC electrical lines, eliminating the need to cut off the plug and separate the conductors.
When you test a device, use this splitter to separates the hot/live conductor from the neutral and ground, which enables users to measure AC current - up to 15 amps on a two-wire or three-wire lines - using a clamp meter.
This splitter provides two openings - one opening provides one-to-one current measurements, and the other provides times-ten (X10) readings so that low-current readings will display with higher resolution on a clamp meter.
This splitter also provides two Voltage Test Jacks so that voltage can be measured with another multimeter while you are reading the current on the same line.
Triplett SatAlign 2 3275 Digital Satellite Signal Strength Meter with Tone for DISH and DirecTV
Powered by the Satellite Receiver (or user supplied power source). Power Source The SatAlign 2 is powered by the Satellite Receiver. There is also a power jack located under the "RECEIVER" terminal which can be used to power the SatAlign 2 with a user supplied external source. If the power level is less than 15V +/-0.5V, the 13V LED will light. If the power level is more than 15V +/-0.5V, the 18V LED will light. The satalign 2 includes audible tone to help you "zero in" on the satellite. A quick, economical, do-it-yourself way to install or realign your satellite dish. The Triplett SatAlign is a quick and economical way for the do-it-yourselfer to. install or realign a DBS satellite dish. No need to pay for expensive service call Just connect the SatAlign between the LNB and any DBS Satellite Receiver and you can precisely align your dish in seconds. The SatAlign, with its built-in signal strength meter, is extremely sensitive with a quick response time making satellite alignment a breeze. The SatAlign works with all brands of Dish Antennas and Satellite Receivers. It will save you hours of installation time and guarantees exact alignment for the best picture quality and maximum rainfade reserve. Specifications: frequency range: 950MHz to 2050MHz. Impedance: 75 Ohms. Maximum input level: -10 dBm. Detection range: -40 to -10 dBm. Insertion loss: 4 dB. Indicators: analog panel meter. Variable pitch tone. Power / polarization LED's. Connectors: LNB / Dish, F Connector. Receiver, F Connector. Dimensions: 1.5" x 2.1" x 3.8". Weight: 3 oz.
DirecTv MSPLIT4R1-03 Approved WNC 4-Way Wide Band SWM Splitter
Satellite input frequency range 2 - 2150 MHz
Insertion loss 10 max dB
Isolation internal 20 @ 950 - 2150 MHz, 4 @ 2 - 30 MHz dB
EMI > 75 dB
Operating temperature range -34 ~ +60 (-30 ~ +140) C°(F°)