SATELLITE / TV DIPLEXER
Provides low loss diplexing of DBS and TV signals. Separates TV and DBS signals prior to satellite receiver input, and filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer is specifically designed for Dish Networks TM DP44 installations, allowing 2 amp passing without burning out.
Low Insertion Loss
High Return Loss
Increased Stop Band Isolation
Designed Specifically for DP44 Switch
Color Coded Insulators
DISH Network Approved
Monoprice 110014 PREMIUM 3-Way Coax Cable Splitter F-Type Screw for Video VCR Cable TV Antenna (110014)
This premium signal splitter is able to split a single input Coaxial Cable signal into multiple separate signals. Convenient and ideal for those who have the need for additional outputs into multiple displays from one source. Passive splitter5~2400 MHz1 input 3 output semi Isolation
AGPtek® Digital Satellite Signal Finder Meter for Dish Network Directv FTA with Compass and Audio Tone
Signal Strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on the buzzer. The digital satfinder is very sensitive and can detect the weakest of signals , strong incoming signals(powerful satellite, big dishes) can easily be attenuated for better readout .Package Included:1* Instructions1* Digital Satillite Signal Finder MeterTrademark AGPtek products are marketed exclusively by Brainydeal
This is the SL5 LNB. This LNB has 4 output for DIRECTV signal. This LNB is lighter and better looking. The Slimline encompasses three LNBs to receive 101°, 110°, 119° degree satellite, plus the new Ka satellite (99°, 103°) for local HD MPEG4 programming.
PREMIUM 6-Way Coax Cable Splitter F-Type Screw for Video VCR Cable TV Antenna (110016)
Premium 6 way Coax Cable Splitter F type Screw - 5~2400 MHz (for Video VCR Cable TV antenna). Gold plated connections for optimal signal transfer. 1 input and 6 outputs allow you to split you cable signal and connect TVs, Cable boxes, TIVO units, cable modems and other devices at the same time.
ZJchao 1HZ-500KHz DDS Function Signal Generator Module Sine+Triangle+Squa...
Product description: Brand new and high quality The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave Maximum output amplitude:± 10Vpp (no-load) Output impedance :50Ω±10% Dc bias: ± 10V (no-load) Display: LCD1602 Resolution :1 Hz power supply: DC 3.5-10V Output frequency range: sine wave: 1Hz-500KHz Square-wave: 1 Hz - 20kHz (the valid range) Triangle wave :1 Hz - 20KHz (the valid range) Sawtooth wave :1 Hz ~ 20kHz (the valid range) Package included: 1 Pcs * DDS Function Signal Generator