The Falcon Folding Dish FLN-1 is neatest, most compact kit for the RV'er, camper, tailgater, and traveler that we offer. This simple solution will work with most every Directv receiver. Our kit comes with everything you need to get your satellite TV service on the road. All you need is your satellite receiver, your TV, and 120V power and you'll be ready to watch TV.
The Falcon FLN-1 is the first of it's kind that can be folded down and stores in a carrying case for later use!
With our exclusive How-to booklet, you'll have the kit up and going in no time.
This kit is compatible with all Directv receivers except: H25, HR34, Genie, C31, and C41. These receiver are SWiM compatible only.
Satellite Dish Mast Mount for Satellite Dish and Antennas
Lot of five,18 Universal mast The standard 1.66 OD satellite mast mount will work with Directv, Dish Network, and FTA satellite dishes with the same unting to vertical, horizontal, and pitches surface (wall, roof, diameter mount tube. Mount have a 90 degree range of motion for moetc.). Use for roof or sidewall mount for regular or large dishes.
38" J-Pole Antenna Mount Versatile all-in-one mount that can be used with antennas or satellite dishes. Can be mounted on the roof, wall, chimney or any other flat surface. J-pipe is reversible from mounting foot for a variety of positioning options. Gray weatherproof coating. Also available in shorter length
non penetrating foof mount satellite mount
This is the Non-Penetrating Roof Mount 2" for the Slimline Dish
2" Mast Diameter
Minor adjustment of mast pitch from 2 degrees positive to 10 degrees negative
Black powder coated steel construction
1.50" angle steel frame
Holds Eight concrete blocks for ballast
No roof drilling or roof penetration required
K.D. assembly allows easier portability to the roof.
This mount provides a 2.0" mast, the installer selects the diameter when assembling the frame. If the flat roof has a sleight pitch the mast can be adjusted from 2Â° outward from the frame to a little over 10Â° inward toward the block area.
No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of the assembly can be varied by the use of either "light" concrete blocks or standard weight blocks.
Of course, this and ALL roof mounted antenna assemblies should be tethered to the building with a flexible steel cable for maximum security.
This tripod mount is perfect when permanent mounting is not desirable. The pole and legs attach to base but can be easily removed for storage and portability. Works with small portable antenna or standard 18-inch satellite antenna and mount. Great for RV