VideoSecu Articulating TV Wall Mount Bracket for Most 37~70 inch Sony Samsung LG Panasonic Vizio Sharp LED LCD PLASMA, Full Motion Dual Arm pulls out up to 25" MW390B WTV
The VideoSecu MW390B is a full-motion TV wall mount for most 37"-70" LED LCD Plasma TVs. Constructed with high gauge steel, it handles screens up to 165lbs. This articulating mount supports TV with mounting hole patterns up to 24" horizontally, and 16" vertically (TV VESA 600x400, 600x300, 600x200, 500x300, 400x400, 400x300, 400x200, 300x300, 200x200, 200x100mm). Dual arm design allows 160 degrees side-to-side swivel (The max degree is depending on your display size), 15 degrees forward or 5 degrees backward tilt and extends the flat panel screen up to 25" from wall for perfect view positioning and reduce glare. The wall plate is 20.4" wide, allowing it to be mounted into two wood studs up to 19.6" apart. The rectangle cable management covers on the arm keeps the wire concealed and prevent pinching. Post installation level adjustment allows +/-3 degrees rotation for perfect level in different view angles. How to ensure the mount compliance with your selected display? First, the weight of your display should be less than 165lbs. Next, mounting holes distance on the rear of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Last, Your TV should be at least 37 inch. Otherwise, you will see the bracket. Notice: This mount fits most 37-60" TVs, some up to 65 70 inch TVs manufactured in recent 3 years
Manufacturer: Wilson Cellular
Brand: Wilson Electronics
Brand New Wilson Replacement Trucker Mast Load Antenna Model # 991109 This is a Wilson Electronics Replacement mast/load for Wilson Cellular Dual-Band Trucker Mirror Mount Antenna. Compatible With: Trucker Antennas Wilson Models: (301101), (301119) and (301133)
non penetrating foof mount satellite mount
This is the Non-Penetrating Roof Mount 2" for the Slimline Dish
2" Mast Diameter
Minor adjustment of mast pitch from 2 degrees positive to 10 degrees negative
Black powder coated steel construction
1.50" angle steel frame
Holds Eight concrete blocks for ballast
No roof drilling or roof penetration required
K.D. assembly allows easier portability to the roof.
This mount provides a 2.0" mast, the installer selects the diameter when assembling the frame. If the flat roof has a sleight pitch the mast can be adjusted from 2° outward from the frame to a little over 10° inward toward the block area.
No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of the assembly can be varied by the use of either "light" concrete blocks or standard weight blocks.
Of course, this and ALL roof mounted antenna assemblies should be tethered to the building with a flexible steel cable for maximum security.
DBS Satellite Dish Roof MountliNon-penetrating roof mountliIdeal for dish antennas up to 24" wide with metal foot mountsliEliminates need for fastenersliAnchors with 6 standard concrete blocks (not included)
Heavy-duty 3 foot galvanized satellite tripod. For use with 2 O.D. mast. Mounts DIRECTVs Slim Line models SL3, SL5, AT9, AU9-S. It can also be used as a support for an off-air VHF/UHF antenna.
The PVTP3U is a heavy-duty tripod used to mount satellite antennas or off-air antennas. It is super sturdy, made of 18 gauge steel. The 3 tripod includes a 28 long center universal support pole which is 2.0 O.D. on one end and 1 5/8 O.D. on the other end.