Digital High Performance Super-Thin Indoor HDTV Antenna with Built-in amplifier 50 Miles Range - Receive HD Television Signals for Free Get the welcoming reception you've always wanted! No one wants to pay and extra bill every month for a service that can be had absolutely free of charge. Digital television broadcasts are uncompressed, resulting in the best picture quality offered today. This Liger Digital Super-Thin Antenna is optimized specifically for these television broadcasts, so expect to see your favorite shows like you've never seen them before with unparalleled HD quality. Technical Specifications: Frequency range: VHF: 174-230MHz UHF: 470~862MHz Input Voltage: AC 120V Working Voltage: DC 6V/100mA Polarization: Horizontal Connector: F connector Included in the package: Digital Super-Thin Indoor HDTV Antenna 50 Miles Range with Built-in amplifier HSS-50 10-Foot Cable X4 Adhesive Stickers Wall Charger Manual Notice: Please stop using during thunderstorms and turn off the power, safety measures. Turn off the power when not in use. If it can't receive well, please the antenna in a different position and run the auto program feature again. Make sure to do this every time you move the antenna.
CRYSTAL CLEAR CHANNELS Receives full HD and digital TV signals. In line amplifier to enhance reception. You can get free broadcast TV signals with enhanced gain, range and frequency performance.
IT CAN GO ANYWHERE Integrated circuitry inside 0.38mm thin high-tech material. 3m coaxial cable for better positioning. Multi-positioning: hidden behind your TV, on your window....
EASY INSTALLATION Connects directly to your TV, plug and play, adjustment free. Two sets of Velcro patches included for easy installation anywhere.
EXCELLENT RANGE Lowest noise figure possible, reception frequency: 470-862MHz. 50-mile range, includes High Performance Cable.
HD antenna reception depends on the homes distance from a broadcast tower, the terrain, and the surroundings. check what available channels are in your area by using this website: dtv.gov/maps
ViewHD HDMI Splitter 1x2 | Support 1080P & 3D | One Input to Two Identical Outputs | VHD-0102M
This is a NOT a HDMI switcher. This is a splitter for two displays to share one video source.
Genuine ViewHD HDMI 1x2 ViewHD splitter, certified v1.3 with 3D support, the best on the market.
* Support either one or both outputs at the same time
* Support 3D video (To get 3D, all units connected to the splitter outputs must support 3D)
* Support deep color 30bit, 36bit and XvYCc
* Support various audio formats (Note: To get Surround Sound, all units at the outputs must support the selected surround sound format)
* Support Blu-Ray players for 24fs film format (Note: If you enjoy watching 24fs film, display must support 24fs, otherwise it will display 50/60fs pictures)
* Support CEC
* Support input cable distance up to 15m HDMI AWG26
* Support output cable distance up to 25m HDMI AWG26
* Support HDMI signal retiming, no loss of quality
* Include DC5V 100-240V universal power adapter with US plug
* Size: 86mm x 45mm x 25mm
* Serviced by J&R Galaxies 30 day no restocking fee return policy, and ViewHD one year warranty
* Light Status: output light will be RED if the content is not HDCP protected; BLUE if the content is HDCP protected; No light means output is not active.
* Per HDMI protocol, only the lower video and audio formats connected to the single HDMI video source will be supported.
* For example: 1) The HDMI video source will send 720P video out if two display units connected to the splitter outputs are 1080P and 720P; 2) The audio format will be stereo if the TV connected to the splitter output can only do stereo (most TVs can only deliver stereo sound)
If you are looking for the best HDMI splitter on earth, please check out the newest item: "ASIN: B007Z8Y6IC ".
For more detailed info, please visit the product forum at the bottom portion of this page.
The RCA Two Way 3Ghz Bi-Di Splitter splits a single incoming coaxial signal into two outgoing signals. It is designed with high grade circuitry for minimal signal loss and maximum transfer. With dual grounded connections and a precision cast body it is an effective and durable solution. Great gold plated input and outputs gives you reliable connectivity.
KING OA8000 Jack Replacement Head HDTV Over-the-Air Antenna
The KING OA8000 Jack Replacement Head is a sleek HDTV antenna that gives you more than expected from such a small package. Ideal for your RV or home, the KING Jack Head will replace your old over-the-air antenna easily. The wider reception range makes it easier to find a signal and scan for available channels. Less directional than traditional RV antennas. It's designed for digital with better reception of UHF signals where over 80% of new DTV channels are broadcast. It also provides great reception of remaining VHF channels. The compact design is up to 70% smaller than traditional RV antennas and offers less wind resistance. The Jack Head is also simple to install in just minutes, without any special tools, on your RV or home. The RV bracket allows the antenna to be mounted in either direction to clear A/C, vent, or other roof obstructions.
Easily locate your satellite signal. Connects to your digital satellite line to easily calibrate the optimum signal. Satellite finder that helps to make precise dish set-up easily. Its ultimate sensitivity will indicate 0.2 dB level difference in 950 to 2050MHz. This is miniature (3.03" x 2.36" x 1.10") and light weight (95 gm). Now with H/V and 22KHz indicators. Indicator lights for verifying that your receiver is set to Horizontal or Vertical polarity and if 22KHz tone is on or off. Green H/V light indicates Vertical Polarity. Red H/V light indicates Horizontal Polarity. Red 22KHz light indicates 22KHz is ON. When aligning a C-band dish do not use your meter in front of the dish to avoid full scale readings. When connecting to a LNBF with gain higher than 65dB, insert a 5dB attenuator between the meter and the LNBF. If a attenuator is not available you may use a long coax (60 feet or more) between the meter and the LNBF. If the meter needle is jumping the sensitivity is too high. Adjust the S.A. level on the back of the meter by punching through the label where marked. Be very careful not to damage the adjustment by turning it too far or too hard.
CKITZE BG-550 Mini portable 4 Port HDMI 1x4 Powered Splitter Ver 1.3 Full HD 1080P with HDCP Support
Features: Splits HDMI signal to 4 HDMI displays completely. Connects four HDMI displayers at the same time to? the same video source. Maintains 480p,576p,720p,1080i and 1080p resolutions. Maintains HDMI video signal. Maintains HDMI digital signal. Fully HDMI 1.3 compliant. HDMI or DVI to HDMI cables used for inputs and outputs. Plug-and-play, intall in seconds Technical Information: Connector: HDMI A type 19 pins female (all digital). Video Amplifier Bandwidth: 10.2Gbps. Highest Resolution: 1080p/1920*1200. Power Supply: DC 5V. Power Consumption: 10W (max.) HDMI pass-through HDCP pass-through.
CVID BG-570 1 to 8 HDMI Splitter Features: 1. Fully HDMI 1.3 specification compliant. It is applicable to source device and high definition display device such as DVD and HDTV which have HDMI ports or digital ports. 2. Support high resolutions up to 1920*1200, including 480i/p, 576i/p, 720i/p, 1080i/p. 3. Extend the transmission distance. 4. Compatible with DVI by using HDMI to DVI adapter. 5. Plug -and-play. 6. Metal casing design and overall shielding without signal interference. 7. LED indicates signal and power mode. 8. Power supply (please refer to technical parameter) 1. Splits HDMI signal to 8 HDMI displays completely, has the ability of buffering and amplifying. Each LU 618D units output can achieves long distance transmission of HDMI signal up to 35 meters. 2. Connects eight HDMI displayers at the same time to the same video source 3. Maintains 480p, 576p, 720p, 1080i and 1080p resolutions. 4.offers solutions for HDTV retail and show site, HDTV, STB, DVD and projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school, and corporate training environments 5. Maintains HDMI video signal 6. Maintains HDMI digital signal 7. Fully HDMI 1.3 compliant 8. HDMI or DVI to HDMI cables used for inputs and outputs 9. Plug-and-play, install in seconds Technical Information: Connector: HDMI A type 19 pins female (all digital) Video Amplifier Bandwidth: 10.2Gbps Highest Resolution: 1080p/1920*1200 Power Supply: DC 5V/3.5A Power Consumption: 10W (max.) Packaging accessories: 1. HDMI Splitter: 1 Piece 2. 5V DC Power Adaptor: 1 Piece 3. User Manual: 1 Piece
Linear 2512 ChannelPlus DC & IR Passing 2-Way Splitter/Combiner
A bi-directional 2-way splitter/combiner that provides a 1 GHz bandwidth and is ideal for antenna and coaxial cable operations. The splitter/combiner can be used for two applications - splitting a signal from a source, or combining signals from multiple sources onto one coax run. Use a DC passing splitter whenever DC IR signals are present on the coax.
CKITZE BG-520 HDMI 1x2 3D splitter v1.3 HDCP 2 ports switcher 3 4 5 8 PS3 XBOX360 DVD Blu-ray
This reliable splitter will take any HDMI signal (rev 1.3b) and duplicate the signal, sending the same high definition signal to 2 displays simultaneously. Product Features: 100% brand new with high quality. The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. 2 x HDMI Outputs supporting up to v1.3b and 1440p. 1 x HDMI Input supporting up to v1.3b and 1440p. Supported Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio. Essentially all available audio options are supported. Video Format:Deep Color 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080P/ 1440i/ 1440p. EIDI Duration: 6 seconds. Specification: Product Type:HDMI 1x2 Splitter . Interface Type: 1 HDMI in,2 HDMI out. Color Black Power Supply: DC 5V. Dimension: 10 X 6.1 X 2.6 cm Weight: 0.09KG Package included: Cvid BG-220 HDMI 1x2 Splitter x 1. 5V AC Adapter x 1 User Manual x 1
OREI HDS-104 1x4 Powered 1080P V1.4 Certified HDMI Splitter with Full Ultra HD 4K/2K and 3D Resolutions w/ EDID Support
The OREI HDS-104 1x4 HDMI splitter will take any HDMI signal and duplicate the signal, sending the same high definition signal to 2 displays simultaneously. The HDS-104 supports Ultra HD 4K/2K resolutions and all 3D resolutions. Product Features: - Excellent Quality - The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. - 4 x HDMI Outputs supporting up to v1.4a - 1 x HDMI Input supporting up to v1.4a and 1440p - Supported Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio - Essentially all available audio options are supported - Video Format: Deep Color 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080P/ 1440i/ 1440p - EIDI Duration: 6 seconds Specification: - Product Type: HDMI 1x4 Splitter - Interface Type: 1 HDMI in, 4 HDMI out - Power Supply: DC 5V (included).