The Directv HD Satellite dish RV tripod kit from Satellite Oasis is the perfect cost effective solution for taking your Directv satellite service with you on the road. If HDTV is what you're after while traveling, this is the ticket. Detailed Satellite Oasis instructions are included with every kit. B band converter may be required to receive certain HD channel on certain receive models (SUP-2400 sold seperately). If you don't need HDTV on the road, we suggest looking at getting a DTV18SKIT. The DTVKAKUSKIT will work on any Directv receiver except for the HDTV receiver models: H25, HR34, C31, C41, or Genie receivers. For those style receivers, a Satellite Oasis model DTVSWMSKIT is required.
Specifications: HDMI 1x2 splitter : mini hdmi splitter One HDMI source to be able to display on two screens ,processing frequency up to 225MHz HDMI switch version 1.3 : monoprice powered hdmi to dual female splitter Compatible with V1.2 , V1.1 , V1.0 Supported Audio : LPCM,Dolby-AC3, DTS7.1, DSD/Dolby True HD/DTS-HD master audio Supported Video :Deep Color 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080P/3D Power supply via power supply 5V 1A (included) Suitable for: hdmi splitter with with wired Xbox 360, Xbox One, Playstation 3, Playstation 4, Beamer, DVB receiver, TFT monitor, HD Ready or Full HD TV, Blu-Ray, DVD or HD-DVD players etc EDID works within 4 seconds Dimensions: approx 7 x 6 x 2 cm Weight: approx 93g Color: Black Package Contents: hdmi channel swithcher 1 x HDMI 3D Splitter 1 x 5V Power Adapter 1 x Manual ABOUT SOWTECH hdmi switch hub 2 outputs We have specilized in electronic field for more than 5 years.As a senior manufacturer,we are always committed to provide customer superior quality products .best hdmi powe red splitter enjoygadgets hdmi s plitter splitter hdmi switch 4k hdmi switch enjoygadgets hdmiswi splitter hdmi switch
This AC Line Splitter provides a fast and easy way to "Split" standard 120V/240V AC electrical lines, eliminating the need to cut off the plug and separate the conductors.
When you test a device, use this splitter to separates the hot/live conductor from the neutral and ground, which enables users to measure AC current - up to 15 amps on a two-wire or three-wire lines - using a clamp meter.
This splitter provides two openings - one opening provides one-to-one current measurements, and the other provides times-ten (X10) readings so that low-current readings will display with higher resolution on a clamp meter.
This splitter also provides two Voltage Test Jacks so that voltage can be measured with another multimeter while you are reading the current on the same line.
Powered by the Satellite Receiver (or user supplied power source). Power Source The SatAlign 2 is powered by the Satellite Receiver. There is also a power jack located under the "RECEIVER" terminal which can be used to power the SatAlign 2 with a user supplied external source. If the power level is less than 15V +/-0.5V, the 13V LED will light. If the power level is more than 15V +/-0.5V, the 18V LED will light. The satalign 2 includes audible tone to help you "zero in" on the satellite. A quick, economical, do-it-yourself way to install or realign your satellite dish. The Triplett SatAlign is a quick and economical way for the do-it-yourselfer to. install or realign a DBS satellite dish. No need to pay for expensive service call Just connect the SatAlign between the LNB and any DBS Satellite Receiver and you can precisely align your dish in seconds. The SatAlign, with its built-in signal strength meter, is extremely sensitive with a quick response time making satellite alignment a breeze. The SatAlign works with all brands of Dish Antennas and Satellite Receivers. It will save you hours of installation time and guarantees exact alignment for the best picture quality and maximum rainfade reserve. Specifications: frequency range: 950MHz to 2050MHz. Impedance: 75 Ohms. Maximum input level: -10 dBm. Detection range: -40 to -10 dBm. Insertion loss: 4 dB. Indicators: analog panel meter. Variable pitch tone. Power / polarization LED's. Connectors: LNB / Dish, F Connector. Receiver,...
Amplified HDTV Antenna - 50 Miles Range, Liger HRF-50 Ultra-Thin HDTV Antenna with Amplifier Signal Booster for the Highest Performance and the Longest Reception Range
Color: Razor 50 Miles
Digital High Performance Super-Thin Indoor HDTV Antenna with Built-in amplifier 50 Miles Range - Receive HD Television Signals for Free Get the welcoming reception you've always wanted! No one wants to pay and extra bill every month for a service that can be had absolutely free of charge. Digital television broadcasts are uncompressed, resulting in the best picture quality offered today. This Liger Digital Super-Thin Antenna is optimized specifically for these television broadcasts, so expect to see your favorite shows like you've never seen them before with unparalleled HD quality. Technical Specifications: Frequency range: VHF: 174-230MHz UHF: 470~862MHz Input Voltage: AC 120V Working Voltage: DC 6V/100mA Polarization: Horizontal Connector: F connector Included in the package: Digital Super-Thin Indoor HDTV Antenna with Built-in amplifier 10-Foot Cable X4 Adhesive Stickers Wall Charger Manual Notice: Please stop using during thunderstorms and turn off the power, safety measures. Turn off the power when not in use. If it can't receive well, please the antenna in a different position and run the auto program feature again. Make sure to do this every time you move the antenna.
Satellite input frequency range 2 - 2150 MHz
Insertion loss 10 max dB
Isolation internal 20 @ 950 - 2150 MHz, 4 @ 2 - 30 MHz dB
EMI > 75 dB
Operating temperature range -34 ~ +60 (-30 ~ +140) CÂ°(FÂ°)