Powered by the Satellite Receiver (or user supplied power source). Power Source The SatAlign 2 is powered by the Satellite Receiver. There is also a power jack located under the "RECEIVER" terminal which can be used to power the SatAlign 2 with a user supplied external source. If the power level is less than 15V +/-0.5V, the 13V LED will light. If the power level is more than 15V +/-0.5V, the 18V LED will light. The satalign 2 includes audible tone to help you "zero in" on the satellite. A quick, economical, do-it-yourself way to install or realign your satellite dish. The Triplett SatAlign is a quick and economical way for the do-it-yourselfer to. install or realign a DBS satellite dish. No need to pay for expensive service call Just connect the SatAlign between the LNB and any DBS Satellite Receiver and you can precisely align your dish in seconds. The SatAlign, with its built-in signal strength meter, is extremely sensitive with a quick response time making satellite alignment a breeze. The SatAlign works with all brands of Dish Antennas and Satellite Receivers. It will save you hours of installation time and guarantees exact alignment for the best picture quality and maximum rainfade reserve. Specifications: frequency range: 950MHz to 2050MHz. Impedance: 75 Ohms. Maximum input level: -10 dBm. Detection range: -40 to -10 dBm. Insertion loss: 4 dB. Indicators: analog panel meter. Variable pitch tone. Power / polarization LED's. Connectors: LNB / Dish, F Connector. Receiver, F Connector. Dimensions: 1.5" x 2.1" x 3.8". Weight: 3 oz.
Batteries: Alkaline AA. Weight (Approximate): 1 lb. Test Services: Checks that each cable drop within a home can support SWM operations , Signal strength (RF energy 950 to 2150 MHz) , LNB current draw (mA) , Voltage supplied by the IRD set top box , Internal battery voltage. Dimensions: 6.50" Hx 2.70" W x 2.70" D.
The SF-95 Satellite Finder is the most useful tool in Satellite TV installation includes DirectTV, DishNetowrk, Bell ExpressVu, FTA and Satellite Internet systems. Designed with SMT technology, its superior sensitivity is capable to indicate signal from 0.2dB to 2300MHz. It is operated by LNB power. A built-in buzzer sounds higher pitch when dish gains higher signal. The SF-95 is complied with EMC directive and CE qualified. Good for home usage.