No matter if you are a professional or hobbyist, this simple meter gives you everything you need. It comes pre-loaded with satellite settings for all the common providers and will provide 21V to the dish for up to 30 minutes. Power your SWM-enabled dish while aligning it without using a power inserter or splitter! Perfect for use with DIRECTV and DISH systems as well as FTA systems
"EasyFind"- satellite identification for super fast installations.
SWiM compatible. The SatLookLite can power the DTV SWM 21V LNB for up to 25 minutes
Spectrum-analyzer 920-2150 MHz with zoom function
Readout NIT -tells Satellite ID and TV/Radio-channel info
Gives RF signal on DTV's Ka 99 & 103 satellites and will lock on the Ku 101 & 119 satellites
This compass and clinometer (angle finder) is a precision liquid filled instrument with both functions built into the same housing. This device is excellent for satellite installers. The exact compass heading can be aligned and then the elevation angle can be measured assuring you of a clear line of sight. This eliminates any guessing before mounting the dish. This compass is super durable, the housing is made of robust aluminum. The viewing lenses are both adjustable for clearest presentation and a nice protective case is included for storage. COMPARABLE TO SUUNTO
The BirDog Ultra satellite finder is a small (6½ x 6½ x 2 ½"), lightweight (2.7 lbs w/ case) signal meter. It has become the meter of choice because of its ability to rapidly find the satellite and peak the dish to the highest signal due to compatibility with the latest encryption coding, including 8PSK Turbo. The meter comes preloaded with the most popular satellites but is also programmable from its own website, www.birdog.tv, and allows the user to load the meter with only the files needed (Over 256 different files can be stored). The BirDog Ultra model has an easy to use spectrum display, a digital constellation screen and many other features, including a custom carrier feature wherein the user can create their own file on site. The meter comes with both an A/C and a D/C charging cord for its rechargeable battery and has a backlight for use in low light conditions.
This compass and clinometer (angle finder) is a precision liquid filled instrument with both functions built into the same housing. This device is excellent for satellite installers. The exact compass heading can be aligned and then the elevation angle can be measured assuring you of a clear line of sight. This eliminates any guessing before mounting the dish. This compass is super durable, the housing is made of robust aluminum. The viewing lenses are both adjustable for clearest presentation and a nice protective case is included for storage
Solid Signal Digiair Pro ATSC TV Antenna Signal Meter Spectrum Analyzer (DIGIAIR-PRO-ATSC)
Manufacturer: Solid Signal
Brand: Solid Signal
This is the industry's leading TV antenna signal meter. Want to get the most TV antenna broadcast channels in your area? This TV antenna signal meter will help you locate and lock onto all available channels faster and easier. Look no further than the Digiair Pro!
Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode. In digital mode it displays the BER (bit error rate) and SNR (signal/ noise ratio). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do. Furtermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker. DIGIAIR Pro is very sensitive and can detect even the weakest signals. DIGIAIR Pro can feed Voltage (5/12 Volt) to external active antennas this feature is short-circuit protected by an automatic fuse. DIGIAIR Pro is charged via an external DC power-source of 13,5 -18 volt. Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design. DIGIAIR Pro operates with 8xAA rechargeable batteries. The unit will works for at least 2 hours with fully charged batteries
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic I/O devices. There are 46 FPGA I/O signals that are routed to 100-mil-spaced through-hole pins, making the Cmod S6 well suited for use with solderless breadboards. At just .7" by 2.6" inches, it can also be loaded in a standard socket and used in embedded systems.
The FPGA on the Cmod S6 can be configured in several ways - from a PC using the on-board Adept USB interface, from a stand-alone programming cable attached to the 6-pin JTAG connector, or from the on-board Quad-SPI Flash memory. Configuration files can be programmed using Xilinx's ISE 14.2 (or higher) development tools, using Digilent's Adept system, or using older versions of the Xilinx tools if Adept is also installed. Xilinx's ISE/Impact programming tool and Digilent's Adept tool will recognize the board and/or FPGA when the board is attached to a PC using a Type-A to micro-B USB cable.
Xilinx's iMPACT tool and Digilent's Adept can both be used to program the FPGA and on-board QSPI ROM. Please refer to the ISE and/or Adept documentation for more information on using the configuration software.
- Transmission Standard: DVB-S/S2 Demodulation - Antenna connection: F-Type - Frequency range: 950-2150 MHz - Signal level: -65 dBm~-25 dBm - LNB Switch: 22KHz - LNB Voltage: 13/18 V, max 300 mA - Demodulation: QPSK - Symbol Rate: 2 LCD Features - LCD Type: FSTN positive transflective - Number of Dots: 128x64 - Active Area (WxH): 59.6x43 mm - Connector: USB - Data Protocol: USB to RS232 Power - Li-ion Battery: 8.4V 800 mAh - Power Supply: Output DC12V/1A; Input 100-240V AC 50/60Hz - Power Consumption: Max.5W - Dimension: 8cm x16cm x4cm - Net weight: about 250 g Package Includes: - 1 x WS-6950 DVB-S DVB-T HD Satellite Finder - 1 x Power Supply - 1 x USB Cable - 1 x Silicone Case - In Retail Package
Discover satellites with ease with the Satellite Finder Meter. The pocket satellite finder features a highly sensitive illuminated meter. With a built-in miniature lamp and buzzer, the device has 75_, 950 MHz-2,250 MHz input. With 13V-18V DC power requirements, the meter has a -40 dBm-10 dBm input level. ;;