1byone Window Antenna 50 Miles Super Thin Amplified Digital HDTV Antenna with 20ft Coaxial Cable, Extreme Soft Design and Lightweight
Manufacturer: 1Byone Products Inc. Brand: 1byone Model: OUS00-0568
1byone Super Thin TV Antenna 1. Receives free High Definition TV broadcast signals (such as ABC, CBS, NBC, Fox, The CW, and PBS). Supports 1080p HD. 2. Can be easily hidden from view behind a picture, bookshelf or television. 3. Fast setup in 3 easy steps – Unwrap, Plug in, and Scan channels. 4. Easy to place high on a window or wall or flat on a table for great reception to watch crystal clear HD shows! You may also use the 1byone TV antenna stand for tabletop placement. Remarks: 1. If you are using a flat screen HDTV, please check your TV's manual to make sure your TV has a built-in tuner for receiving over-the-air broadcasts. 2. You should retune your TV and digital box from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. 3. Make sure your tuner can receive HD signals, otherwise you won't be able to receive and watch HD channels. 4. Signal quality determines how many channels you can receive as well as picture quality. Once you receive the antenna, hook it up to your TV, and try moving it around your home to find the placement with the best signal. You might be surprised how many HD channels you can receive! 5. All of our antennas have a 12 months warranty. If you are not satisfied with the amount of channels you are receiving, please contact us so we may immediately assist you and help to solve any problems you have.
Super Buddy Meter Replacement Battery for 21 and 29
Manufacturer: Satellite Oasis Brand: Satellite Oasis Model: SB-BAT
Time to replace your aging Super Buddy meter battery? This battery is built to for compatibility with the Super Buddy line of meters. Install the battery yourself and save money! Replacement instructions included. 6 month warranty.
SF-95DR Digital Satellite Signal Meter Finder Network Directv
Manufacturer: BC Brand: Souked Model: SKUSKD0388219
Description : SF-95DR Digital Satellite Signal Meter Finder Network Directv With Compass FAT The SF-95DR is an industry first digital satellite finder to come on the market. Much more accurate than any other meter in its class, the SF-95DR is a professional instrument with a consumer price tag. Now we can have a professional digital satellite finder with professional performance & results. SF-95DR has a blue back light to allow use at night. The signal meter never needs to be recalibrated nor does it need complicated programming. It automatically recognizes the LNBF frequency and works with any C band, Ku band, or Ka band satellite. No need to input transponder frequency, symbol rate, or polarity. Truly plug & play. Specifications : Frequency range : 950-2150MHz Supply voltage : 13-18V DC Input level range : -40dBm~ -10dBm Operating temperature : 0-40 Impedance : 75? Use LCD to display the satellite signal intensity Built-in signal alert buzzer With LCD backlight / buzzer and attenuation control function DC pass to LNB ATT increasing key. If the incoming signal is too strong, (the thermometer-scales shows max and the signal strength value shows 99) it can easily be attenuated by enabling this "attenuation" funtion, it reduces the incoming signal to a lower level. There are four step attenuation totally. How to connect : connect a jumper cable from the LNB to the "Satellite" port on the digital SATFINDER. connect the cable from your satellite receiver to the "Receiver" port on the digital SATFINDER. Notice : To avoid a continuous full scale reading, do not use the digital SATFINDER directly in front of the dish. When using a LNB with gain higher than 60dB, insert a 5dB attenuator between the LNB/LNBF and the digital SATFINDER. In case no satellite receiver is at hand a 13-18V DC power supply with F-connector can be connected
Arrow Handheld Satellite Beam 146/437-10WBP
Manufacturer: Arrow Antenna Brand: Arrow Antenna Model: 146/437-10WBP
Arrow Handheld Satellite Beam "BP" Stands for Back Pack - Two-piece Boom - Split boom. The Arrow II line of Antennas has been engineered to provide maximum gain and efficiency in the smallest practical size & weight. Only About 19 oz. (split boom add 1 oz.) Aluminum Arrow Shafts are used for elements. The 2 in-line Gamma Matches (shown below) are pre-assembled & pre-tuned. One connector for VHF and one for UHF. Only female BNC is available. The Boom is 3/4" square (with rounded corners) and 37 1/2" long. Model BP Split Boom longest part is less than 22 inches long. Note the big black foam grip for comfortable holding. Under the foam grip, the boom is drilled & tapped with a 1/4-20 hole for most camera tri-pods. Boom & elements all have plastic tips for safety. Because the antenna is hand held, power should be kept to less than 10 watts maximum. If mounted, maximum power is 150 watts.
3GHZ Satellite Finder by MIC
Manufacturer: MIC Model: na
SATELLITE INSTALLATION, SIMPLIFIED. Eliminate the guesswork when setting up your satellite system with the RadioShack 3GHz Satellite Finder. It allows you to easily tune your system while you're outside, eliminating the need to run inside and view the signal meter on the TV screen while installing or adjusting your satellite dish. It's designed to work with DSS, DBS and C-band dishes, including DISH Network and DIRECTV.
EverTrust(TM)Satellite Signal Finder Meter For Sat Dish LNB DIRECTV
Satellite Signal Strength Meter Finder Squawker Finder Locator Tester, Dish Network, 2 GHz, 13 - 18 VDC, 75 Ohm
Manufacturer: DIRECTV Brand: NAC Wire and Cables Model: LYSB00V08EWAK-ELECTRNCS
Get perfect satellite dish reception in seconds with this easy-to-use DSS Satellite Finder! This tool is a must for RV / motor home enthusiasts who take a satellite dish with them on the road, OR for home users. This indispensable product lets you easily make adjustments yourself, without having to shout back and forth with a second person at the TV location
First Strike Meters FS1 Pro HD Digital Satellite Finder
Manufacturer: DMS International Brand: First Strike Model: FS1-ProHD
If you have always wanted a professional satellite finder meter but didn't want to pay the "BIG BUCKS", this is the meter for you. First Strike Meters are made for the professional but are easy for the Novice to understand and use. No more searching through complicated menus to find the setting you need to change. All parameters show on one screen making it easy for the user to modify any setting. Don't let the price fool you, the FS1 First Strike satellite finder meter will give you all the signal measurements that you need to install or re-align your satellite dish at a price you can afford. FS1 quickly and easily finds even weak signals. Unlike the competitors meters, you can do a sweep of the dish to find the signal. Uses the same type display screen as cell phones so it can be read in direct sunlight. Display screen has a switchable back light so your meter can be used in low light conditions. FS1 has a Global Data Bank that holds all the satellites in a separate data bank. The meter also has a User Defined Data Bank that stores 100 satellites. Entries in the Global Data Bank can be copied to the User Defined Data Bank and then easily edited to fit your needs. The user can define new entries from the keypad. Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence. Rechargeable Li-on battery lasts approximately 3.5 hours on a full charge. If the battery runs low during use, you can loop the satellite receiver through the meter and power the meter from the satellite receiver power supply. Meter housing has a battery door for easy access and replacement of the battery. Comes with a "Ruff Neck" protective jacket to protect your meter on the job. Universal charger operates on 120vac/60Hz or 220vac/50Hz making it usable anywhere. Easy change power plug.
HobbyKing® Discovery Buzzer Signal Loss Alarm Loss Aircraft Finder
Manufacturer: HobbyKing Model: TALT-PN-733652812
Plug it in to a spare channel on your receiver and the Buzzer can be activated by a switch on your TX. Switch the buzzer on to help locate a lost plane or multirotor.
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!