BlazeVideo DVB S/S2 Handheld LCD Digital Satellite TV Dish Antenna Signal Level Finder Meter, Dish Satellite TV Signal Locator, Sound Alarm When Lock Signal, Built-in Battery for Charging Black
Manufacturer: BlazeVideo Brand: BlazeVideo Model: 3240HD
This is a professional meter for professional man or who knows much about TV Setting.Description: Display: 128X64 LCD Display with backlight Solution: GX1132+AV2012 Shows both S/N and C/N Shows strength and quality readings Sound alarm when lock signal Show numerical reading and bar reading DVB S/S2 satellite finder Can be used in all country Two color led show status, When it is incharging status,Led is in red, When it catched the signal, Led is green Global satellites and TP reploaded Support DirectTV 1.0 Support multiple satellites/tp blind nd Nit scan Digital meter for signal strength (in numerical and #118alue and picture) Easy satellite manager (EDIT, delete and SCAN) Edit TP, frequency, LNB switch, symbol rate and more Completely programmable by the user Input frequency: 950 to 2,150MHz Input level: -65 to 25dBm Input impedance: 75 Ohms Automatic calculate angle: AZ, EL Upgrade: S/W by PC DisEqC control 22kHz control Fast charge Li-ion battery (1700mAh), can last 4 hours Indicator symbol: 13/18V Indicator symbol: 22kHz USB port for software upgrades USB software upgrade cable included 12V DC power charger included Coxial cable included Interface: LNB IN/RS232/DC12V Buttons: Menu/Return/up/down/left/right/switch on/off Package List: 1 Handheld LCD Digital Satellite Finder/CARTON Size(WxDxH): 178.9*81.9*35.4MM Gift Box Size(WxDxH):236*110*75MM Accessories Standards: 12V ,1A adapter/Manual/USB-RS232 cable Optional: Compass
CMOD S6 Xilinx Spartan 6 Board
Manufacturer: Digilent Inc Brand: Digilent
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic I/O devices. There are 46 FPGA I/O signals that are routed to 100-mil-spaced through-hole pins, making the Cmod S6 well suited for use with solderless breadboards. At just .7" by 2.6" inches, it can also be loaded in a standard socket and used in embedded systems. The FPGA on the Cmod S6 can be configured in several ways - from a PC using the on-board Adept USB interface, from a stand-alone programming cable attached to the 6-pin JTAG connector, or from the on-board Quad-SPI Flash memory. Configuration files can be programmed using Xilinx's ISE 14.2 (or higher) development tools, using Digilent's Adept system, or using older versions of the Xilinx tools if Adept is also installed. Xilinx's ISE/Impact programming tool and Digilent's Adept tool will recognize the board and/or FPGA when the board is attached to a PC using a Type-A to micro-B USB cable. Xilinx's iMPACT tool and Digilent's Adept can both be used to program the FPGA and on-board QSPI ROM. Please refer to the ISE and/or Adept documentation for more information on using the configuration software.
Fringe Electronics Pro TV and Satellite Finder
Manufacturer: ElectricalCentre Brand: ElectricalCentre Model: fringetvsat
The Fringe Electronics PRO TV & Sat Signal Finder is a compact battery powered in-line signal strength meter for aligning directional aerials or Satellite Dishes on buildings or Motorhomes. The PRO TV Signal Meter has been developed and is manufactured in the UK by Fringe. It is very easy to use, simply connect your aerial or satellite dish to the unit and rotate the aerial/dish until you have the strongest signal indicated by the multiple LEDs. The more LEDs illuminated the stronger the signal. The PRO TV Signal Finder can be used for finding the strongest signal for both Digital Freeview and Analogue signals in your Home, Motor Caravan, Motorhome or Campervan.
SATlink WS-6906 Professional Digital Satellite Signal Finder Meter
Manufacturer: VtooLand Brand: CarLife Model: 0799975198507
SATlink WS-6906 Professional Digital Satellite Signal Finder Meter This WS-6906 handheld satellite alignment meter is very convenient for installer to catch quick and accurate Alignment for Antenna to the best position. With this finder, you can set and align a satellite dish quickly, easily and accurately, and enjoy watching the free channels! Features: High quality and stable performance: it's with a microprocessor controller. 3.5" LCD color display, bigger menu window. Channel picture, signal strength and signal quality can be showed on LCD Screen after you set up your local DVB-S Parameter. It's with auto-protection for LNB short-circuit. It shows Azimuth and Elevation, CBER/VBER, S/N, signal strength and signal lock sound alarm. Supports both AV IN and AV OUT for camera, LCD, etc. Built-in large capacity 3000mAH Li-ion battery. Matched with a protective bag for easier outdoor using. Support language: English, German, French, Portuguese, Spanish, Italian, Dutch, Polish, Turkish. English user manual is included in the CD disk. Specifications: System capabilities Fully DVB-S comliant Yes LNB/Tuner input Connector F type female Frequency range 950MHz-2150MHz Signal level -65dBm~-25dBm LNB power 13/18V, max 350mA LNB Switch control 22KHz DiSEqC Ver 1.0/1.2 Demodulator Front end QPSK Demodulation Range 2Mbps~45Mbps SCPC and MCPC capable Yes System resource Processor 32bit processor (133MHz) SDRAM 4 * 16Mbyte FLASH 8Mbyte Video decoder MPEG2 Main ...
LeaningTech DVB-T 95DT Mini Digital TV Antenna Satellite Signal Finder Meter, TV Signal Strength Meter, TV Reception Systems, with Compass, White
Manufacturer: LeaningTech Model: LYSB01GFZLGKQ-ELECTRNCS
Features *Signal meter for your RV over-the-air TV antenna. *Connects in-line with your antenna. *Numbers feedback displays signal strength intuitively. *Variable sensitivity adjustment to work with TV towers both near and far. *LeaningTech DVB-T 95DT TV Antenna Signal Finder Meter with compass is more convenient to locate the satellite signal.Specifications Frequency range: 170 - 860MHz Input level range: 65 - 95 dBuv Power supply: 9-12V DC or Battery pack 6x AA batteries(not included) Certification: RoHS, CE Eco-fridenly Material Color: White Dimension: 125*35*64mm Weight: 200gOperation 1. Connect the antenna cable to the left F Female and the battery pack cable to the right F Female. Remove any external amplifier* that may be connected to the antenna. 2. Adjust the antenna to the best position by watching the meter's reading. Higher up the scale gives a better signal. If the finder's reading becomes full scale, adjust the level control knob to reduce the reading to around 5 (Turning the knob clockwise will decrease the reading), continue to move the antenna until you have the highest possible meter reading. 3. Remove the finder and replace any amplifier that was disconnected.Important Note:-If your antenna has an internal amplifer, (eg: 01MM-SQ01), it should be powered by an external power supply via a DC power inserter. Make sure the power inserter is positioned between the finder and the antenna.
Digital LCD Satfinder Satellite Finder Signal Strength Meter Sky Dish Freesat
Manufacturer: cisno Brand: CISNO Model: LYSB01FCXD4J8-ELECTRNCS
Instructions: SATELLITE FINDER OPERATION: 1: Switch the satellite receiver on, the digital SATFINDER will turn on by itself. 2: Set your dish to the proper azimuth and elevation settings. (The information should be supplied with your satellite dish). 3: Adjust the knob until the signal strength display at 0% (the critical point). 4: Peak the signal by slowly moving the azimuth and elevation of your dish. The higher values, the better signal. If the digital SATFINDER's reading becomes full scale, you can adjust the "?ATT" to reduce the incoming signal to a lower level. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch. 5: Remove the jumper cable and digital SATFINDER, and reconnect the LNB/ LNBF to your receiver. NOTICE: To avoid a continuous full scale reading, do not use the digital SATFINDER directly in front of the dish. When using a LNB with gain higher than 60dB, insert a 5dB attenuator between the LNB/LNBF and the digital SATFINDER. In case no satellite receiver is at hand a 13-18V DC power supply with F-connector can be connected on the "Receiver" side of the digital SATFINDER to power the SATFINDER Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you Specification: Color: Grey Size:9.7x6.3x2.5cm(approx) Input Frequency:950-2150 MHz Input Level Min:-40dBm Input Level Max: -10dBm Input Impedance: 75Ï‰, F connector Output ...
Digital Satellite TV Finder DVB-S/S2 Finder Meter LCD Satellite Signal Finder Meter and Satellite Dish signal Finder
Manufacturer: one audio digital limited Brand: Generic
DVB S/S2 satellite finder Friendly operation OSD design Global satellites and TP reploaded Support Multiple satellites/tp blind nd Nit scan Two COLOR leds show status When it is incharging status,Led is in red, When it catched the signal, Led isin green LCD Display with Backlight Can be used in all country Function Detail Display:128X64 LCD Display with backlight Solution:GX1132+AV2012 Shows both S/N and C/N Shows strength and quality readings Sound alarm when lock signal Show numerical reading and bar reading Digital meter for signal strength (in numerical and #118alue and picture) Easy satellite manager (EDIT, delete and SCAN) Edit TP, frequency, LNB switch, symbol rate and more Completely programmable by the user Input frequency: 950 to 2,150MHz Input level: -65 to 25dBm Input impedance: 75 Ohms Automatic calculate angle: AZ, EL Upgrade: S/W by PC Easy to carry, size onlyÂ 17.9*8.2*3.55cm DisEqC control 22kHz control Fast charge Li-ion battery (1600mAh), can last 4 hours Indicator symbol: 13/18V Indicator symbol: 22kHz USB port for software upgrades USB software upgrade cable included Carrying case included 12V DC power charger included Coxial cable included Interface:LNB IN/RS232/DC12V Buttons:Menu/Return/up/down/left/right/switch on/off ã€€ Packing inforamtion Machine Size(WxDxH):178.9*81.9*35.4MM Gift Box Size(WxDxH):236*110*75MM ã€€ Accessories Standards: 12,1A Europe standard adapter/USB-RS232 cable/ Compass
SatShooter Precision Compass & Angle Finder (Clinometer) Combination Tool
Manufacturer: Perfect Vision Brand: SatShooter Model: SATSHOOTER
This compass and clinometer (angle finder) is a precision liquid filled instrument with both functions built into the same housing. This device is excellent for satellite installers. The exact compass heading can be aligned and then the elevation angle can be measured assuring you of a clear line of sight. This eliminates any guessing before mounting the dish. This compass is super durable, the housing is made of robust aluminum. The viewing lenses are both adjustable for clearest presentation and a nice protective case is included for storage. COMPARABLE TO SUUNTO
NEW Battery Replacement for Pa3817u-1bas Pa3817u-1brs Toshiba Satellite L700 Satellite L730 Satellite L735 Satellite L740 Satellite L745d Satellite L745 Satellite L755 Satellite L755d Satellite L770 Satellite L770d Satellite L775 Satellite L775d Satellite
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!