SATlink WS-6908 3.5" DVB-S FTA Professional Digital Satellite Signal Finder Meter
Manufacturer: santink Brand: SATlink
Features: Battery powered, fully support DVB-S signal Very convenient to catch quick and accurate alignment for antenna to the best position Enables you to select big menu window for data figure which is helpful for alignment Microprocessor controller ensures reliable and stable performance LCD screen will show channel picture, signal strength and signal quality Show Azimuth and Elevation, CBER/VBER, S/N, signal strength and signal lock sound Faint signal detection, support antenna power OFF/13V/18V Can play photo(JPEG) and music(mp3) files from external usb memory device Auto-protection for LNB short-circuit AV INPUT and AV OUTPUT for Camera, LCD etc. Build-in high capacity Lithium Battery (8.4V 3000mAh), can work more than 4 hours . Parameter: System Capabilities: Fully DVB-S compliant(Yes) LNB/Tuner Input Connector: F type, male Frequency range: 950MHz to 2150MHz Signal lever: -65dBm to -25dBm LNB supply: 13/18V, max400mA LNB switch control: 22KHz DiSEqC: Ver 1.0, 1.1 & 1.2 Demodulator Front end: QPSK Symbol rate: 2Mbps to 45Mbps SCPC and MCPC Capable: Yes Spectral inversion: Auto conversion System Resource Processor: 32bit processor (200MHz) SDRAM: 16Mbyte FLASH: 2Mbyte EEPROM: 8Kbyte Video Decoder MPEG 2: Main Proflie@Main Level Data Rate: up to 15M bits/s Resolution: 720*576, 720*480 Video format: PAL/NTSC/SECAM MPEG Audio MPEG 1 layer 1&2 Type: Mono Sampling rates: 32, 44.1 and 48KHz Serial Data Interface Connector: USB type Power Supply Li-oN Battery: 3000 mA Supply voltage: 12.6 Volt Charger: 90 to 240V Panel Connectors Digital tuner input: F type, male Package list: 1*WS-6908 Satellite Finder 1*Black Protective Bag 1*Strap 1*Car Charger 1*Power Adapter 1*AV Cable 1*CD
Steren 200-992 SATELITE FINDER with ANALOG METER
Manufacturer: Steren Brand: Steren Model: 200-992
200-992 STEREN SATELITE FINDERW/ ANALOG METER W/ ANALOG METER. Adjustable meter strength, Frequency range: 0.95GHz - 2.15GHz, 11dB gain
Solid Signal Ka Hi/lo Ku Satellite Signal Meter SWM Meter (Satlooklite)
Manufacturer: Solid Signal Brand: Solid Signal
No matter if you are a professional or hobbyist, this simple meter gives you everything you need. It comes pre-loaded with satellite settings for all the common providers and will provide 21V to the dish for up to 30 minutes. Power your SWM-enabled dish while aligning it without using a power inserter or splitter! Perfect for use with DIRECTV and DISH systems as well as FTA systems
SatShooter Precision Compass & Angle Finder (Clinometer) Combination Tool
Manufacturer: Perfect Vision Brand: SatShooter Model: SATSHOOTER
This compass and clinometer (angle finder) is a precision liquid filled instrument with both functions built into the same housing. This device is excellent for satellite installers. The exact compass heading can be aligned and then the elevation angle can be measured assuring you of a clear line of sight. This eliminates any guessing before mounting the dish. This compass is super durable, the housing is made of robust aluminum. The viewing lenses are both adjustable for clearest presentation and a nice protective case is included for storage. COMPARABLE TO SUUNTO
Birdog Ultra Satellite Signal Meter w Satshooter Clinometer Compass
Manufacturer: BIRDOG / PERFECT VISION Brand: BIRDOG / SATSHOOTER Model: BIRDOG ULTRA / PVINC
The BirDog Ultra satellite finder is a small (6Â½ x 6Â½ x 2 Â½"), lightweight (2.7 lbs w/ case) signal meter. It has become the meter of choice because of its ability to rapidly find the satellite and peak the dish to the highest signal due to compatibility with the latest encryption coding, including 8PSK Turbo. The meter comes preloaded with the most popular satellites but is also programmable from its own website, www.birdog.tv, and allows the user to load the meter with only the files needed (Over 256 different files can be stored). The BirDog Ultra model has an easy to use spectrum display, a digital constellation screen and many other features, including a custom carrier feature wherein the user can create their own file on site. The meter comes with both an A/C and a D/C charging cord for its rechargeable battery and has a backlight for use in low light conditions. This compass and clinometer (angle finder) is a precision liquid filled instrument with both functions built into the same housing. This device is excellent for satellite installers. The exact compass heading can be aligned and then the elevation angle can be measured assuring you of a clear line of sight. This eliminates any guessing before mounting the dish. This compass is super durable, the housing is made of robust aluminum. The viewing lenses are both adjustable for clearest presentation and a nice protective case is included for storage
Solid Signal Digiair Pro ATSC TV Antenna Signal Meter Spectrum Analyzer (DIGIAIR-PRO-ATSC)
Manufacturer: Solid Signal Brand: Solid Signal Model: DIGIAIR-PRO-ATSC
This is the industry's leading TV antenna signal meter. Want to get the most TV antenna broadcast channels in your area? This TV antenna signal meter will help you locate and lock onto all available channels faster and easier. Look no further than the Digiair Pro! Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode. In digital mode it displays the BER (bit error rate) and SNR (signal/ noise ratio). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do. Furtermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker. DIGIAIR Pro is very sensitive and can detect even the weakest signals. DIGIAIR Pro can feed Voltage (5/12 Volt) to external active antennas this feature is short-circuit protected by an automatic fuse. DIGIAIR Pro is charged via an external DC power-source of 13,5 -18 volt. Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design. DIGIAIR Pro operates with 8xAA rechargeable batteries. The unit will works for at least 2 hours with fully charged batteries
Neewer Replacement LCD Screen Display Repair for WS-6906 Satellite Finder
Kingzer 950-2150MHz Digital Satellite Signal Meter Finder Compass LCD Display SF-95DR
Manufacturer: Kingzer Brand: KINGZER Model: KIAC0805
About this product:The digital satellite finder with LCD display, buzzer, compass is designed to connect to your LNB and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.Features:LCD display with backlit to show the satellite signal intensity.With LCD backlit, buzzer, and attenuation control function.Designed with a compass for easier and quicker tuning.Mini size and light weight, really portable.Connect to your LNB and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.No external power or batteries required. Power supplied from your satellite receiver.Easy user-friendly operation.Specifications:Input frequency: 950-2150MHzInput level min: -40dBmInput level max: -10dBmInput impedance: 75 Ohm, F-ConnectorOutput impedance: 75 Ohm, F-connectorPower supply: DC 13~18VOperating range(LNB gain): 52 ~ 60dBHousing material: PlasticCertification: CE, RoHSItem size: Approx. 12.5 * 6.4 * 2.5cm / 4.9 * 2.5 * 0.98inItem weight: Approx. 93g / 3.3oz Package size: Approx. 16.4 * 10.5 * 5.5cm / 6.4 * 4.1 * 2.2inPackage weight: Approx. 156g / 5.5ozPackage Included: 1 * Satellite Finder1 * User Manual
CMOD S6 Xilinx Spartan 6 Board
Manufacturer: Digilent Inc Brand: Digilent
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic I/O devices. There are 46 FPGA I/O signals that are routed to 100-mil-spaced through-hole pins, making the Cmod S6 well suited for use with solderless breadboards. At just .7" by 2.6" inches, it can also be loaded in a standard socket and used in embedded systems. The FPGA on the Cmod S6 can be configured in several ways - from a PC using the on-board Adept USB interface, from a stand-alone programming cable attached to the 6-pin JTAG connector, or from the on-board Quad-SPI Flash memory. Configuration files can be programmed using Xilinx's ISE 14.2 (or higher) development tools, using Digilent's Adept system, or using older versions of the Xilinx tools if Adept is also installed. Xilinx's ISE/Impact programming tool and Digilent's Adept tool will recognize the board and/or FPGA when the board is attached to a PC using a Type-A to micro-B USB cable. Xilinx's iMPACT tool and Digilent's Adept can both be used to program the FPGA and on-board QSPI ROM. Please refer to the ISE and/or Adept documentation for more information on using the configuration software.
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!