1byone Window Antenna 50 Miles Super Thin Amplified Digital HDTV Antenna with 20ft Coaxial Cable, Extreme Soft Design and Lightweight
Manufacturer: 1Byone Products Inc.
1byone Super Thin TV Antenna 1. Receives free High Definition TV broadcast signals (such as ABC, CBS, NBC, Fox, The CW, and PBS). Supports 1080p HD. 2. Can be easily hidden from view behind a picture, bookshelf or television. 3. Fast setup in 3 easy steps â€“ Unwrap, Plug in, and Scan channels. 4. Easy to place high on a window or wall or flat on a table for great reception to watch crystal clear HD shows! You may also use the 1byone TV antenna stand for tabletop placement. Remarks: 1. If you are using a flat screen HDTV, please check your TV's manual to make sure your TV has a built-in tuner for receiving over-the-air broadcasts. 2. You should retune your TV and digital box from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. 3. Make sure your tuner can receive HD signals, otherwise you won't be able to receive and watch HD channels. 4. Signal quality determines how many channels you can receive as well as picture quality. Once you receive the antenna, hook it up to your TV, and try moving it around your home to find the placement with the best signal. You might be surprised how many HD channels you can receive! 5. All of our antennas have a 12 months warranty. If you are not satisfied with the amount of channels you are receiving, please contact us so we may immediately assist you and help to solve any problems you have.
Easily locate your satellite signal. Connects to your digital satellite line to easily calibrate the optimum signal. Satellite finder that helps to make precise dish set-up easily. Its ultimate sensitivity will indicate 0.2 dB level difference in 950 to 2050MHz. This is miniature (3.03" x 2.36" x 1.10") and light weight (95 gm). Now with H/V and 22KHz indicators. Indicator lights for verifying that your receiver is set to Horizontal or Vertical polarity and if 22KHz tone is on or off. Green H/V light indicates Vertical Polarity. Red H/V light indicates Horizontal Polarity. Red 22KHz light indicates 22KHz is ON. When aligning a C-band dish do not use your meter in front of the dish to avoid full scale readings. When connecting to a LNBF with gain higher than 65dB, insert a 5dB attenuator between the meter and the LNBF. If a attenuator is not available you may use a long coax (60 feet or more) between the meter and the LNBF. If the meter needle is jumping the sensitivity is too high. Adjust the S.A. level on the back of the meter by punching through the label where marked. Be very careful not to damage the adjustment by turning it too far or too hard.
Satellite TV Finder lets you easily tune your satellite dish while outside. Determine the direction of the strongest satellite signal. Great for remote satellite antennas. Easy satellite alignment for dishes on homes, RVs and motor homes. Make adjustments yourself without a secondary helper
Manufacturer: Electronic Controlled Systems, Inc., DBA KING
The KING SureLock Digital TV Signal Finder offers a fool-proof way to locate the strongest available TV signal(s) no matter where you are. If your TV antenna can receive the signal, the SureLock SL1000 can help you point your antenna to maximize it! Rotating your directional TV antenna can be time-consuming. Unless you are pointed at the correct TV tower, you wonâ€™t get best reception when doing a TV channel scan. But you donâ€™t know if you are pointing your TV antenna towards the correct tower unless you complete a full channel scan. Itâ€™s time to know where to aim your TV antenna before you do your channel scan, and the KING SL1000 can help. The SureLock SL1000 was designed to simplify the TV antenna aiming process and ease your frustrations. The meter connects in-line with your over-the-air TV antenna via coax input and output connections and provides bright LED feedback for signal strength measurements. The SL1000 also has a variable sensitivity adjustment to allow you to work with all TV transmitting towers, both near and distant. Look for the strongest TV signal and lock your antenna in!
Powered by the Satellite Receiver (or user supplied power source). Power Source The SatAlign 2 is powered by the Satellite Receiver. There is also a power jack located under the "RECEIVER" terminal which can be used to power the SatAlign 2 with a user supplied external source. If the power level is less than 15V +/-0.5V, the 13V LED will light. If the power level is more than 15V +/-0.5V, the 18V LED will light. The satalign 2 includes audible tone to help you "zero in" on the satellite. A quick, economical, do-it-yourself way to install or realign your satellite dish. The Triplett SatAlign is a quick and economical way for the do-it-yourselfer to. install or realign a DBS satellite dish. No need to pay for expensive service call Just connect the SatAlign between the LNB and any DBS Satellite Receiver and you can precisely align your dish in seconds. The SatAlign, with its built-in signal strength meter, is extremely sensitive with a quick response time making satellite alignment a breeze. The SatAlign works with all brands of Dish Antennas and Satellite Receivers. It will save you hours of installation time and guarantees exact alignment for the best picture quality and maximum rainfade reserve. Specifications: frequency range: 950MHz to 2050MHz. Impedance: 75 Ohms. Maximum input level: -10 dBm. Detection range: -40 to -10 dBm. Insertion loss: 4 dB. Indicators: analog panel meter. Variable pitch tone. Power / polarization LED's. Connectors: LNB / Dish, F Connector. Receiver, F Connector. Dimensions: 1.5" x 2.1" x 3.8". Weight: 3 oz.
AGPtekÂ® Digital Satellite Signal Finder Meter for Dish Network Directv FTA with Compass and Audio Tone - Blue
Signal Strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on the buzzer. The digital satfinder is very sensitive and can detect the weakest of signals , strong incoming signals(powerful satellite, big dishes) can easily be attenuated for better readout . Specification: Input Level Min.:-40dBm Input Level Max.:-10dBm Input Frequency:950-2150 MHz Input Impedance:75Â¦Â¸, F connector Output Impedance: 75Â¦Â¸, F connector Power Supply: DC 13/18 V Operating Range (LNB gain):52-60dB Package Included: 1* Instructions 1* Digital Satillite Signal Finder Meter Trademark AGPtek products are marketed exclusively by Brainydeal
Signal Strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on the buzzer. The digital satfinder is very sensitive and can detect the weakest of signals , strong incoming signals(powerful satellite, big dishes) can easily be attenuated for better readout .Package Included:1* Instructions1* Digital Satillite Signal Finder MeterTrademark AGPtek products are marketed exclusively by Brainydeal
Low priced, one of the best digital signal finder in the market. Have you ever used an analog signal finder and thought you have signal locked in, and once you got in front of your receiver, notice that the signal meter tricked you? With a digital signal finder, there is no guess work. You either have true signal, or you don't. Specifications: Input frequency: 950 - 2150 MHz; Input level Min: -40dBm; Input level Max: -10 dBm; Input impedance: 750hm, F-Connector; Output Impedance: 750hm, F Connector; Power Supply: DC 113V - 18V; Operating range (LNB gain): 52 ~ 60 dB; Package included: 1 x Instructions 1 x Digital satellite signal finder
WS-6906 meter allows to quickly setup satellite dishes and LNBs.
With the built-in satellite tuner, the user can view on the screen specific FTA channels and assess their quality. This enables the user to select (at the design stage) and verify (during implementation) the equipment (dish, LNBs, amplifiers, multiswitches).
Its A/V input allows connecting CCTV cameras, making the device a very useful tool for installers of video surveillance systems.
The installer can precisely set the focal length and focus of each camera.
WS 6906 is built-in the satellite parameter which come from Asia/Europe/Mid-East and America. The consumer could Delete, Modify or Add the parameter via the Date Wire and specified program, Human-Computer Dialogue is a plus fashion.
WS 6906 exceed the limitation that only can display character on the similar production,3.5" highly precise LCD lead to watch the FTA TV program immediately which it monitor or detect by the demodulator.
As a convenient satellite validated tool, the technical index has surpassed the mid-range Digital Satellite Searcher. The teamer of WS 6906 optimized the electro circuit, eliminate redundant code due to capture signal more faster and effective, it is the most suitable Digital Satellite Searcher for satellite players and engineering technical personnel.
Support language: English, French, Farsi, Russian, Arabic, Portuguese, Turkish.
3.5 inch High definition TFT LCD Display
Support both AV out and AV in
Support Auto Satellite and PID Search
Measurement type: strength\quality; bit error rate
Input Frequency Range: 950~2150MHz
Supports DISEQC 1.0/1.2, 0/22Khz Tone
Both lock light and beep for the indicator of signal
3 Operation Modes: Digital TV; Digital Radio; Favorite
EPG for on Screen Channel Information
Easy Graphic Menu Interface
RS232 port for software upgrades
8.4V/3000mAh Li-ioN Battery included
Max operating time: 4 hours
1 x WS-6906 Satellite Finder
1 x Black Protective Bag
1 x Strap
1 x USB Upgrade Cable...