ANTOP Coaxial Cable Splitter Ultra Mini Distribution for Satellite TV Antenna Signals 2GHz- 5-2050MHz
ANTOP Coaxial Cable Splitter Ultra Mini Distribution for Satellite TV Antenna Signals 2GHz- 5-2050MHz by ANTOP at Home Entertainment Centers Online. MPN: AT-706. Hurry! Limited time offer. Offer valid only while supplies last. ANTOP 2GHz RF Splitter 1 in 3 out, AT-706 The ANTOP3-ways Splitter AT-706splits a single incoming coaxial signal, such as satellite signal,
The ANTOP3-ways Splitter AT-706splits a single incoming coaxial signal, such as satellite signal, over-the-air HD (digital TV) antenna signal, into three outgoing signals.
Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer, corrosion resistance, and reliable connectivity.
All ports DC Power Passing enables DC power from all outputs to pass the power to the input (or in the opposite direction). Thus all satellitereceivers can supply LNB power, while all amplified outdoor antenna or masthead amplifier can be powered from the interior power supply devices. Care should be taken to ensure the input of a receiver will not be damaged by power from another receiver. Reverse powering protection is provided in many receivers and systems.
All ports female F connector 75 Ohm
All ports DC power pass
Light weight and compact size
Zinc die-cast with 18K gold-plated
Low insertion loss, high return loss and isolation for satellite and over-the-air HDTV signal
Two pieces of screws attached
Screening factor: 5-300MHz≥75dB,300-470MHz≥75dB,470-1000MHz≥65dB,1000-2050MHz≥55dB
Insertion Loss: 6.5dB (5-47MHz),7.5dB (47-1000MHz), 8.5dB (1000-1750MHz), 9.5dB (1750-2050MHz)
Isolation: 20dB (5-2050MHz)
Return Loss: 10dB (5-47MHz)
Receiving Range: TV/SAT.
All Port DC Pass: 24V/200mA (max.)
Features & Highlights
- Low insertion loss, high return loss and isolation for better performance on TV and satellite signal
- Splits a coaxial cable signal source (cabletellite/antenna) to two destinations
- 5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals
- Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance
- High shielding structure for lower digital noise and higher signal quality
|Manufacturer:||Antop(r) Antenna Inc.|
|Publisher:||Antop(r) Antenna Inc.|
|Studio:||Antop(r) Antenna Inc.|
|Item Weight:||0.2 pounds|
|Item Size:||3.9 x 0.9 x 0.9 inches|
|Package Weight:||0.15 pounds|
|Package Size:||3.31 x 0.94 x 0.94 inches|