Inteset Infrared (IR) Cat 5 Adapter Kit For Cable Box and STB IR Extenders and IR Repeater Kits
Inteset Infrared (IR) Cat 5 Adapter Kit For Cable Box and STB IR Extenders and IR Repeater Kits by Inteset at Home Entertainment Centers Online. MPN: INT-IRCAT535. Hurry! Limited time offer. Offer valid only while supplies last. This kit lets you use your existing Cat 5 or Cat 6 (Cat5) cable to extend the IR signal from your TV using your remote to devices in a different
This kit lets you use your existing Cat 5 or Cat 6 (Cat5) cable to extend the IR signal from your TV using your remote to devices in a different location. You can use our IR Repeater kit as shown in the diagram or you can connect an IR Extender directly from your TV to your cable box over Cat5.
TV to Cable Box: To connect an IR Extender directly to your cable box plug the IR Extender that works with your cable box into the Cat5 to 3.5 Adapter using the Male to Male Adapter. Then plug the other end into your Cat5 long distance cable. You may need the short Cat5 cables provided to match the gender of your long distance cable. At the cable box end of the long distance cable, plug the other Adapter onto the cable and then plug the 3.5 mini plug directly into your cable box "IR IN" Jack. This only works if the Extender works with your cable box already. We recommend our 38-56 kHz Extender for this use.
IR Repeater at your TV End: Plug the IR Receiver from your Repeater Kit into the Male/Male adapter. Plug the other end of the Male/Male adapter into the 3.5 end of the Cat5 to 3.5 Adapter. Plug the short Cat5 cable into the Adapter. Plug the other end of the short Cat5 cable into your network jack.
IR Repeater at the Control Box End: Plug the Cat5 to 3.5 Adapter into the IR Repeater Control Box at one of the IR Receiver connectors. Plug the Cat5 cable into the other end of the Adapter. Plug the opposite end of the Cat5 cable into your network jack.
Any emitters attached to the Control Box will receive the signal sent through the IR Receiver in this setup and then be sent to where the emitter buds are attached. You can control your cable box, A/V receiver or any other IR devices.
This kit includes: (2) 3' Cat5 cables, (2) 10" Cat5 to 3.5mm Adapters, (1) 3.5mm Male/Male Adapter. See the installation illustration above. If you have any questions or comments contact us at: http://universalremotes.net/
Features & Highlights
- Allows you to plug any IR Repeater Kit into your existing Cat5 or Cat6 network
- The perfect accessory to the Inteset IR Repeater Kit. Search above at:"B010CAJ4AY"
- No cutting wires, no splicing. Plug and Play. Installs in minutes.
- Use your IR Extender over Cat5 directly to your cable box.Does not work thru Switches
- Runs on Dedicated Point to Point Cables. 1 Year Warranty. US Support.
|Item Weight:||0.25 pounds|
|Item Size:||5 x 0.8 x 0.8 inches|
|Package Weight:||0.25 pounds|
|Package Size:||6.3 x 0.2 x 0.2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Inteset, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: INT-IR3856EMU, ean: 0722512376007,
The Inteset USB IR repeater kit allows you to use an existing remote control to operate up to four AV components located in the rear of the room, in a cabinet, an equipment closet, or anywhere else. The Inteset IR distribution technology allows you t...
By Infrared Resources
mpn: IRP-1U, ean: 0804879562696,
USB power cable Plugs directly into any USB port to power the kit. Infrared Resources IRP-1U Operates -1- device. Works with All brands of A/V device's and remote control (30- 60kHz). Including Soundbars,Scientific Atlanta digital cable boxes: 4200,...
By Kanex Pro
mpn: HDEXT50M, ean: 0617407454611,
HDMI Extender over CAT5/6 up to 165ft. (50m)Extend DVI/HDMI over cost-effective Cat5 cable up to 164 ft. (50m). Supports full HD 1080p (1920x1080@60Hz). Local HDMI output (loop out). Built-in EDID to ensure proper HDMI transmission. Built in EQ butto...
Sharp recently discontinued the remote that originally shipped with your device. When the remote was discontinued, Sharp announced that the remote in the picture is the official Sharp replacement for the following devices: LC60LE632, LC-60LE632, LC60...
mpn: unknown, ean: 0766239477135,
This Alpine remote was originally shipped with the following Alpine devices: CDEW235BT, CDE-W235BT, CDEW265BT, CDE-W265BT, CDM7829, CDM-7829 If your Model Number is NOT listed above, please send us a message so we may help you obtain the correct remo...
This remote originally shipped with the following Kenwood Models: DNX892, DNX893S, DNX994S, DNX9960, DNX9980HD If your Model Number is NOT listed above, please send us a message so we may help you obtain the correct remote control.True Kenwood Part -...
This Sony remote was originally shipped with the following Sony devices:HCDSHAKEX1, HCD-SHAKEX1, HCDSHAKEX7, HCD-SHAKEX7 If your Model Number is NOT listed above, please send us a message so we may help you obtain the correct remote control.True Sony...
This Sony remote was originally shipped with the following Sony devices: XBR49X850B, XBR-49X850B, KDL65W950B, KDL-65W950B, XBR70X850B, XBR-70X850B If your Model Number is NOT listed above, please send us a message so we may help you obtain the correc...
Up for sale are 120 holders for the following Epson scanners: Expression 10000XL, Expression 11000XL, Expression 12000XL If your model number is NOT listed above, please send us a message so we may help you obtain the correct Film Holder.True Epson P...
mpn: ZHE045US, ean: 0711583416385,
Overview: This HDMI extender splitter includs one transmitter and two receivers, extend 1 HDMI source to 2 HDMI displays over single CAT6/6a/7 cable up to 50m/164ft. The highest resolution supported is 1920×1080@60Hz, and it supports IR passback, E...